Vi Kapler style hinges

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Vi Kapler style hinges

Post by taildrags »

Pieters;

I've got a new batch of tail hinge castings coming from the foundry. Looks like they misunderstood the order and are sending me double the quantity that I usually get. Even with a reject rate of about 2% of the parts, I will have enough castings for over 100 Air Campers! Even if I sold one set a month, which is like 3x what I usually sell, I'll have a large enough supply for about 10 years. My guess is that the world will be very different in 10 years, and if I live that long I'll be 77 years old and the Air Camper design will be 100 years old! I think this may be the last batch of hinge castings I'll be ordering ;o)
User avatar
E.Woodson
Posts: 20
Joined: Wed Apr 18, 2018 9:08 pm
Location: Madisonville Louisiana

Re: Vi Kapler style hinges

Post by E.Woodson »

Are these sold "foundry fresh" or milled and ready to use? Too hot down here right now to spend too much time on the grinder...might have to pay my kids to get em cleaned up :D
Training is good, but it's no substitute for experience...
Colonel Rosa Kelbb
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

They are shipped out pretty much as they come out of the molds. Sometimes the sprues are knocked off, but not always.
Brian Amato
Posts: 112
Joined: Fri Aug 31, 2018 9:23 am

Re: Vi Kapler style hinges

Post by Brian Amato »

How much are they? I'd like a set.
Brian Amato
kwesting2@gmail.com
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

Brian-??!! You're still out there! Are you still offering your aluminum Piet plates for sale? I still show them on my website along with the brass ones that I sell.

I'll contact you off-line about a set of hinges; thanks.
Brian Amato
Posts: 112
Joined: Fri Aug 31, 2018 9:23 am

Re: Vi Kapler style hinges

Post by Brian Amato »

Yup...I still sell the data plates. I've had to raise the price a bit over the years.
The outfit that prints them for me keeps raising their prices every year so I have to.
Anyone can go to the ebay site:
https://www.ebay.com/itm/Pietenpol-home ... w9NxTsZbQr
They really dress up your Piet.
Brian
JimBob
Posts: 28
Joined: Sun Mar 05, 2017 4:09 pm
Location: Osceoal, IN

Re: Vi Kapler style hinges

Post by JimBob »

I'm a long way from needed but would like to go ahead and get a set. How does one go about doing?
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

JimBob- just email me at taildrags@hotmail.com and I'll get you more info.
Brian Amato
Posts: 112
Joined: Fri Aug 31, 2018 9:23 am

Re: Vi Kapler style hinges

Post by Brian Amato »

Oscar....got my hinges yesterday and they look great. Thanks so much.
Brian
Isp3898
Posts: 4
Joined: Mon Mar 04, 2019 12:19 pm

Re: Vi Kapler style hinges

Post by Isp3898 »

I would also like to get a set of hinges. How do I get them?
Thanks

Rick Wright
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

Rick; email me at taildrags@hotmail.com for more info. They are $35 for a set of nine pairs of hinges, as-cast, ready for the builder to finish.

Oscar Zuniga
Medford, OR
Mike Wissing
Posts: 1
Joined: Sun Apr 07, 2019 12:42 am

Re: Vi Kapler style hinges

Post by Mike Wissing »

Oscar, I'm in Bend and fly to Medford a lot. I'm busy with a Piet build and would love to speak to you.
Could you please post your website URL?
User avatar
Terry Hand
Posts: 87
Joined: Thu May 18, 2017 2:37 pm

Re: Vi Kapler style hinges

Post by Terry Hand »

Mike,

In case Oscar does not log in for a few days, here is his website -

http://www.flysquirrel.net/rogueairparts.html
Semper Fi,

Terry Hand
Athens GA
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

Mike; my other website is http://www.flysquirrel.net .

I'm doing a lot of work on VA facilities all over the West coast lately so I've been out more than usual the last few months, but with summer approaching, I hope to get back into my routine of at least spending Saturday afternoons at the hangar and in the air.

I check my email pretty much continuously, so email is the best way to reach me, either in or out of the country. Also, text my mobile phone (in the country) or WhatsApp (out of the country).

Oscar Zuniga
Medford, OR
Air Camper NX41CC, A75 power
User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Vi Kapler style hinges

Post by taildrags »

Oops... yeah, what Terry said ;o)

-Oscar
Post Reply