Rudder Post

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
PoconoJohn
Posts: 40
Joined: Tue Jan 14, 2020 9:07 pm

Rudder Post

Post by PoconoJohn »

Has anyone welded sections together for the Rudder Post? Bending it seems like a difficult task.

Also, regarding the bushing in the rudder bar; plans call for 3/8" 18ga (.049) tube in there with a 5/16" bolt. A 5/16" bolt won't fit in such a tube. So, AN4 bolt with plans specified bushing tube, or AN5 and larger bushing tube?

Thank you!

John Cronin, NE PA

Earl Brown
Posts: 25
Joined: Mon Nov 04, 2019 12:24 pm

Re: Rudder Post

Post by Earl Brown »

I drilled the bushing to fit the AN5 bolt

Post Reply