Is this 1/8" ply required at hinges?

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
PoconoJohn
Posts: 165
Joined: Tue Jan 14, 2020 9:07 pm

Is this 1/8" ply required at hinges?

Post by PoconoJohn »

The plans show a 1/8" ply where the hinges go. That's with the hinges shown on the plans. Do I still need them with eye bolts using a large washer?

John C
Attachments
piet99993.jpg
Earl Brown
Posts: 69
Joined: Mon Nov 04, 2019 12:24 pm

Re: Is this 1/8" ply required at hinges?

Post by Earl Brown »

John, that plywood gives the fasteners a stronger surface to tighten down on.
The spruce is too soft by itself.
donbrewer
Posts: 23
Joined: Sat May 27, 2017 2:36 pm

Re: Is this 1/8" ply required at hinges?

Post by donbrewer »

YES ! You do need them, even using eyebolts and 970 washers. Don
PoconoJohn
Posts: 165
Joined: Tue Jan 14, 2020 9:07 pm

Re: Is this 1/8" ply required at hinges?

Post by PoconoJohn »

Thank you Earl & Don!

John
Post Reply