Ken Perkins Piet

Share photos of your Pietenpol, whether complete or project.
Post Reply
User avatar
Richard Roller
Posts: 44
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Ken Perkins Piet

Post by Richard Roller » Mon May 22, 2017 11:30 am

HI everyone. I thought that I would try to upload some pictures of Ken Perkins Piet, N34KP. Ken has been a great friend of mine through the years. He is a wonderful mechanic and machinist. There are many parts flying around on various Piets that were made by Ken. I've been fortunate that Ken has taken me under his wing (so to speak), taught me many things, and of course the ultimate present, lets me fly his Piet.
Perks_Piet_Landing_2005_1a.JPG
N34KP.jpg
Brodhead2008_010.jpg
120909_111954.png
17_orange_piet.jpg

tstinemetze@cox.net
Posts: 1
Joined: Thu May 30, 2019 8:53 pm

Re: Ken Perkins Piet

Post by tstinemetze@cox.net » Thu May 30, 2019 9:03 pm

Glad to say that I will have quite a few "Perkins Parts" on my plane (if I ever get it done.) My visit to Ken's home/machinist's den was very inspirational.

KenBickers
Posts: 9
Joined: Tue Mar 07, 2017 7:00 pm

Re: Ken Perkins Piet

Post by KenBickers » Tue Jun 04, 2019 9:29 pm

Tom, how about a progress report or some pictures? Nothing like some atta-boys to get things moving again. Cheers, Ken

Spaghetti
Posts: 3
Joined: Thu May 30, 2019 7:27 am

Re: Ken Perkins Piet

Post by Spaghetti » Tue Jun 04, 2019 10:18 pm

Where did Ken”s Piet go after his passing?

User avatar
Richard Roller
Posts: 44
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: Ken Perkins Piet

Post by Richard Roller » Mon Jun 24, 2019 3:10 pm

I have Ken's Piet.

Post Reply