Pietenpol-List: Re: New Pietvair Forum for Corvair Builders and Flyers

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Re: New Pietvair Forum for Corvair Builders and Flyers

Post by matronics »

Original Posted By: "TriScout"
Tim be sure to not secure ribs before you have the drag wires in. I didn't andit was a pain altering the ribs to clear the wires.Sent from my iPadJack Textor> On May 29, 2015, at 8:34 AM, Tim White wrote:> > > I'm building the 3 piece wing and can't figure out the rib placement. I've positionedthe ribs according to the original 29 ft wing plan, but when I referto the 3 piece wing supplement, I notice there seems to be a rib located 8 1/4"from the butt rib on the wing (next to the center section). That leaves thegap to the next rib approximately 5". Am I missing something? Should I repositionthe next rib to split the difference?> > Tim White> Springfield Ohio> > > > ________________________________________________________________________________Subject: Pietenpol-List: Re: New Pietvair Forum for Corvair Builders and FlyersIs Up
Locked