Original Posted By: Jack
Thanks for those ideas!--------JohnRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Varnish, varnish, varnish
Pietenpol-List: Varnish, varnish, varnish
Re: Pietenpol-List: Re: Varnish, varnish, varnish
Original Posted By: Jack
Nice job terry.....Lots of good information tgere...!--------Jake Schultz - curator,Newport Way Air Museum (OK, it's just my home)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: Re: Varnish, varnish, varnish
Nice job terry.....Lots of good information tgere...!--------Jake Schultz - curator,Newport Way Air Museum (OK, it's just my home)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: Re: Varnish, varnish, varnish
Re: Pietenpol-List: Re: Varnish, varnish, varnish
Original Posted By: "Charles N. Campbell"
Very good point Oscar! Planning on leaving the sides off as long as possible.I have them varnished. After installed I will plan a couple mor coats.Sent from my iPadJack Textor> On May 30, 2015, at 11:26 AM, "taildrags" wrote:> > > Jack; this is the best shot you will ever get at thoroughly, completely, andsmoothly getting all that wood varnished so as much work as it is, if you don'ttake your time and do it while you have a nice bare frame, you'll regret itlater because the only way you'll be able to reach some of those areas, it willjust be loading a brush and dabbing some varnish way back in an inaccessiblespot.> > And yes, there is something to be admired in the rich honey gold of a smoothwooden assembly with a nice coat of varnish on it.> > --------> Oscar Zuniga> Medford, OR> Air Camper NX41CC "Scout"> A75 power> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 809#442809> > > > > > > > > > ________________________________________________________________________________Date: Sat, 30 May 2015 18:24:04 -0400Subject: Re: Pietenpol-List: Re: Varnish, varnish, varnish
Very good point Oscar! Planning on leaving the sides off as long as possible.I have them varnished. After installed I will plan a couple mor coats.Sent from my iPadJack Textor> On May 30, 2015, at 11:26 AM, "taildrags" wrote:> > > Jack; this is the best shot you will ever get at thoroughly, completely, andsmoothly getting all that wood varnished so as much work as it is, if you don'ttake your time and do it while you have a nice bare frame, you'll regret itlater because the only way you'll be able to reach some of those areas, it willjust be loading a brush and dabbing some varnish way back in an inaccessiblespot.> > And yes, there is something to be admired in the rich honey gold of a smoothwooden assembly with a nice coat of varnish on it.> > --------> Oscar Zuniga> Medford, OR> Air Camper NX41CC "Scout"> A75 power> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 809#442809> > > > > > > > > > ________________________________________________________________________________Date: Sat, 30 May 2015 18:24:04 -0400Subject: Re: Pietenpol-List: Re: Varnish, varnish, varnish