Brodhead Pietenpol Association

Hi Oscar........ thanks good comments. I traded emails with Andrew Pietenpole today and he said his grandfather did it both ways. And the last one he did, he laminated a bunch of pieces together to make the spars. I think at this point I have decided to stick with 1 inch, and just update the fitting...

Hi folks.......... reactivating this discussion...... this is right where I am at.... 1" vs 3/4" spars........ would love to hear your current thoughts. Here are some options as I see it. From my point. a. 1 inch, non-routed b. 1 inch, routed c. 3/4 inch, non-router, with 1/8 strips glued ...

Oscar.......... wow!!! thanks
Just what I needed. I think I will steal all those ideas and move forward.
Thanks so much.
I will let you know how it goes as I move forward.

also working on my rudder hinges.

Mark

Ken thanks.... good comment on the side loads with the leaf spring style. This project came with a partially completed "plans style" skid. And I will keep looking at it. I will soon have to choose my options. Just cause I am more familiar with it, I am leaning to the leaf spring, but under...

Fun, great conversation......... since I live in "aircraft meka" and in my DAR life I inspect a lot of experimental homebuilts.......... I think I am going to check out the rudder and tail wheel distance spacing on both certified and experimental. With all of us Super Cub guys arguing abou...

great conversation........... I think I will check some other planes and see if the hole spacing from rudder horn, and from tail wheel is similar. Although some planes have the tail wheel steering come directly off the rudder horn. So of course a bit different geometry. Other similar question..........

hmmmm.. curious..... ok. I will keep trying.
thanks
Mark

Howdy. Bobby you mentioned you bought fittings from an online store and they were .080. Was this by chance Icarus. I have been trying to get a hold of them for a couple weeks with no response. I am using the info on their web site........ Any idea if they are still around and doing it........ or hav...

Hi Ken great comments........ thanks...... I think I have decided to go the "steering" route. If you have pictures of your tail wheel and spring set up that would be great. I see a number of folks that are using a single leaf spring, and then a typical small homebuilt steerable tail wheel....

Hi folks I am deciding on what type of tail wheel on this Alaska project I absorbed. Presently there is no landing gear or tail wheel. I think I am planning on doing the cabane vee type "cub style" gear up front. I love the look of the all wood, old school gear, but I think it might be bet...

Hi Oscar
Mark Barker in Alaska.
I need 4 or 5 sets........ left a message on your phone and a PM on this forum.
Thanks so much........

take care
mark

Hi folks. Mark Barker here in Alaska. I "absorbed" an already started Pietenpol project, so diving into things, and learning. The fuselage is basically complete, but has a bit of hanger/sitting around damage that needs repair. It is the long version so that is good, for me a taller guy. Th...