Search found 81779 matches

by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Coulda, Ca Old Time Fly In..July 19
Replies: 22
Views: 1464

Pietenpol-List: Re: Air Camper plans

<r>Original Posted By: "curtdm(at)gmail.com" <br/> tenpol-List: Aluminum Wing Strut/Jury Strut Attachment=0A>To: pietenpol-list(at)matronics.com=0A>=0A>=0A>=0A>I have the smaller aluminum wing struts from Carlson Aircraft, (1.00" X 2.44") and will also be using their jury struts. My questions are on...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Re: Engines
Replies: 84
Views: 5384

> ** Re: Pietenpol-List: Aluminum Wing Strut/Jury Strut Attachment

Original Posted By:> speedbrake(at)sbcglobal.net
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Checkride!!
Replies: 16
Views: 1258

Pietenpol-List: Re: Checkride!!

<t>Original Posted By: "aabreu" <br/> Subject: Pietenpol-List: Gary Boothe & EAA Chapter win spot landing and flour bombing competition!What great photos and such a great report Gary of your flight to the Golden West fly-in! I=C3=A2=82=AC=84=A2ll bet your grandson was bragging to all his friends...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Re: Progress Report
Replies: 30
Views: 1744

<r>Original Posted By: "Greg Cardinal" <br/> > To: pietenpol-list(at)matronics.com> > > I know that some of you have seen this on Facebook... but for those that don't frequent the site=2C here is a recent photo of my progress. Things have been a bit slow for a few months due to a variety of reasons=...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Piet list statistics
Replies: 4
Views: 548

Pietenpol-List: Re: Piet list statistics

<t>Original Posted By: "giacummo" <br/> > To: pietenpol-list(at)matronics.com> > > Lorenza=2C thanks for the thoughts. How did you handle the transition from the 1/4=A4=9D flooring to the 1/8=A4=9D gussets?> > --------> John Francis ___________________________________________________________________...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Wood gear legs.
Replies: 13
Views: 1081

<t>Original Posted By: "Jack Phillips" <br/> Those who are operating on wood gear legs.... Did you glue the spruce legs to the ash blocks or did you rely on the steel fittings and bolts to make the connection? Yes I know=2C small work space but it's warm=2C dry and ten steps from the kitchen! Scott ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: 3 Piece Wing Question
Replies: 14
Views: 1408

RE: Pietenpol-List: 3 Piece Wing Question

<t>Original Posted By: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <br/> etenpol-list(at)matronics.com>Subject: RE: Pietenpol-List: 3 Piece Wing QuestionGrant,My center section spars and L & R wing panel spar ends do not butt up against each other. I respect Jack Phillips mechanical load...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Mag needed for an A75
Replies: 19
Views: 1437

<r>Original Posted By: Michael Perez <br/> > To: pietenpol-list(at)matronics.com> > > A theoretical question for any of you who might be able to help me understand the HST (sales tax). Let's say I buy an airplane from a guy in Ontario. He de-registers the Canadian-registered aircraft and I bring it ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Rudder horns
Replies: 20
Views: 1391

Pietenpol-List: Re: Perez's Build Status

<r>Original Posted By: "aerocarjake" <br/> etenpol-list(at)matronics.com>Subject: Re: Pietenpol-List: Re: nice Piets for salewhat does the word might mean? is he looking for a piet or not? I keep reading reading might in this news letter. the word might means nothing. a couple of months ago another ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Piet project for sale?
Replies: 6
Views: 887

Pietenpol-List: Re: Piet project for sale?

<r>Original Posted By: "jarheadpilot82" <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Tom=2C> > I will be the first to ask it=2C as I am sure others are thinking it. Are you sure you want to sell? Plenty of builders have put their projects aside for long periods of time. Ask Kevin Purte...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: giblets
Replies: 37
Views: 2364

Original Posted By: jim hyde
> To: pietenpol-list(at)matronics.com> > > I wonder how my pietie would fly if I didn't cover the fuse ________________________________________________________________________________Date: Mon, 31 Mar 2014 19:21:41 -0700 (PDT)
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: giblets
Replies: 37
Views: 2364

Re: Pietenpol-List: giblets

Original Posted By: Ken Bickers
============= ________________________________________________________________________________Date: Mon, 31 Mar 2014 22:53:04 -0400Subject: Re: Pietenpol-List: giblets
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: giblets
Replies: 37
Views: 2364

Pietenpol-List: Re: giblets

<r>Original Posted By: "jarheadpilot82" <br/> > > To: pietenpol-list(at)matronics.com> >> >> > I wonder how my pietie would fly if I didn't cover the fuse>> *<URL url="http://www.matronics.com/N========================">http://www.matronics.com/N========================</URL> > forums.matronics.com/...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
Replies: 7
Views: 13783

<r>Original Posted By: Michael Perez <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Brian=2C> > I am not getting your logic-> > "Your weight has nothing to do with it. You simply don't fly if there is an aft CG and having the fuel in the wing just makes the problem worse."> > Fuel in the...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
Replies: 42
Views: 2748

RE: Pietenpol-List: Airplane Weights

<t>Original Posted By: larharris2 Harris <br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s Aerothane...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
Replies: 42
Views: 2748

RE: Pietenpol-List: Airplane Weights

<t>Original Posted By: glenschweizer(at)yahoo.com<br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s A...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
Replies: 42
Views: 2748

Pietenpol-List: Re: Airplane Weights

<t>Original Posted By: "jarheadpilot82" <br/> > > Lorenzo,> > > > My Pietenpol came in at 745 lbs., which was about 80 lbs more than I was expecting. I believe most of that extra weight was in the paint that I chose, PolyFiber=99s Aerothane polyurethane. It is very heavy, and difficult to paint. I e...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
Replies: 21
Views: 5054

Pietenpol-List: Airplane Weights

<t>Original Posted By: Michael Perez <br/> =0A=0A=0AGood discussion thread on Weight and Balance. I have just received my package from Doc Mosher with WWs articles. Well documented info on CG and axle location. Keeping the CG location in mind as I build will have a high priority. I have much more to...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
Replies: 21
Views: 5054

Re: Pietenpol-List: Airplane Weights

<t>Original Posted By: jack(at)bedfordlandings.com<br/> Hi Lorenzo I looked at the Oretex website. When checking prices=2C I became discouraged when all they said was "compared to other finishing systems=2C the cost of spray guns=2C compressor setting up a booth...blah blah blah Oretex is comparable...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
Replies: 21
Views: 5054

RE: Pietenpol-List: Airplane Weights

<r>Original Posted By: larharris2 Harris <br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s Aerothane...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
Replies: 21
Views: 5054

<t>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Lorenzo=2C> > I did a little "dumpster diving" on the internet and found a guy's estimate from Better Aircraft Fabric for the Oratex 6000 dated September 2013. It shows the price for the 1800mmX1m mat...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Here Is An Interesting Read
Replies: 2
Views: 474

Pietenpol-List: Here Is An Interesting Read

<r>Original Posted By: "jarheadpilot82" <br/> > > Good discussion thread on Weight and Balance. I have just received my package from Doc Mosher with WWs articles. Well documented info on CG and axle location. Keeping the CG location in mind as I build will have a high priority. I have much more to s...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
Replies: 7
Views: 13783

<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> > > Cliff=2C> > In response to your question=2C "Doesn't everything below it act like a > pendulum? > > The short answer is NO=2C that said=2C some explanation is required...> > In a properly designed and built airplane...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
Replies: 7
Views: 13783

<r>Original Posted By: "Gary Boothe" <br/> > To: pietenpol-list(at)matronics.com> .com>> > My theory of the elevator droop is it could be an optical illusion. The outboard line from the elevator and horizontal stabilizer is bent because of the leading edge of the horizontal stabilizer not having the...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Elevator droop
Replies: 7
Views: 820

Re: Pietenpol-List: Elevator droop

<t>Original Posted By: Gary Boothe <br/> =0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0AUh Oh........here are some photos of a to-the-plans=2C properly-built (and powered) Pietenpol in flight. If I am not mistaken=2C I detect some elevator droop in all of them.=0AYou know=2C there are consequences=2C t...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Re: Pietenpol-List: Elevator droop...zoom in
Replies: 1
Views: 477

Re: Pietenpol-List: Elevator droop...zoom in

<t>Original Posted By: "M. Zeke Zechini" <br/> > > > > Uh Oh........here are some photos of a to-the-plans, properly-built (and powered) Pietenpol in flight. If I am not mistaken, I detect some elevator droop in all of them. You know, there are consequences, to making changes to the original genuine...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Elevator droop
Replies: 7
Views: 820

Pietenpol-List: Corvair Mounts

<t>Original Posted By: "john francis" <br/> >> >> >> >> Uh Oh........here are some photos of a to-the-plans, properly-built (and powered) Pietenpol in flight. If I am not mistaken, I detect some elevator droop in all of them. You know, there are consequences, to making changes to the original genuin...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Speaking of outdated stuff? Center section fuel tanks
Replies: 2
Views: 446

Re: Pietenpol-List: Speaking of outdated stuff? Center section fuel tanks

<t>Original Posted By: Lion Mason <br/> =0A=0A=0A=0A=0A=0A=0A=0AScott Knowlton=97your new nose fuel tank looks great! Way to go. =0A=0A =0ASpeaking of outdated items and things that could be considered unsafe or obsolete----let us rethink Bernie=92s putting fuel up in the=0Awing right over the passe...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Combustible lines
Replies: 5
Views: 1822

<r>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> m>> > Hello=2C> > Like allways asking for something... I build a wing tank=2C and I want to know if the lines (from the tank to de gascolator) could be of rubber. I ask because i never saw any one of this kind=2C a...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Combustible lines
Replies: 5
Views: 1822

Pietenpol-List: Steel-tube fuselage update - landing gear welded

<t>Original Posted By: "aerocarjake" <br/> =0A=0A=0AThere is another discussion starting suggesting that the fuselage is the right place for the tank. Please read that.Rubber hoses are still in the mainstream of certified aircraft. They are reliable and easy to purchase but be sure you get the right...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
Replies: 21
Views: 5054

RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section

<t>Original Posted By: owner-pietenpol-list-server(at)matronics.com=0A<br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ATerry=2C=0Ayou can see the effects of what you are asking using the spreadsheet I posted=0Ayesterday. If you just swap the values for the fuel tank and the baggage=0Ac...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
Replies: 7
Views: 13783

<r>Original Posted By: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Oscar=2C> > Thanks for the input. Your clear explanation was the reason for my question. It sounds like running your nose tank low puts the non-standard weighing guy ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Airspeed indicator
Replies: 12
Views: 883

Pietenpol-List: See you at Brodhead

<r>Original Posted By: "William Wynne" <br/> > To: "pietenpol-list(at)matronics.com" > Subject: Re: Pietenpol-List: Airspeed indicator>> I get the same eye roll here everyday especially when cxed checks come> in from aircraft spruce and wicks.. the ac 43 13 1b is on line at faa.govforfree.. I hate e...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: Re: you don't need a static port or static line
Replies: 1
Views: 1174

Pietenpol-List: Re: you don't need a static port or static line on a Pietenpol

<r>Original Posted By: "bdewenter" <br/> > To: pietenpol-list(at)matronics.com> >> > Mike=2C> > Perhaps the reason why Tony Bingelis gets high marks in your book is because what you were looking for just happened to be his strength=2C namely information on simple plans built plane with a Continental...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Plywood
Replies: 85
Views: 4238

Pietenpol-List: Re: 4130 tubing laying around

<r>Original Posted By: "William Wynne" <br/> > To: pietenpol-list(at)matronics.com> >> > Builders=2C> > Six months ago I was sent a very nice hat from EAA HQ=2C one of the new ones with the traditional logo. It was something of an olive branch=2C as I had worked as a staff writer for many years=2C b...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Which one?
Replies: 23
Views: 2027

Re: Pietenpol-List: Re: Which one?

<r>Original Posted By: danhelsper(at)aol.com<br/> > To: pietenpol-list(at)matronics.com> >> > Kenny=2C> I watched the Youtube clip several times=2C and I think you are doing something pretty neat. I have been a life long fan of flatheads=2C Grace and I have a little collection in the hangar.> > I re...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
Replies: 21
Views: 1843

<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> >> > Brian=2C> You are correct on the limits of compression increase on flatheads. The point I was trying to make is that Kenny's HP per cubic inch at 6.5:1 should be better than the Ford HP per cubic inch at 4.25 to 5....
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
Replies: 21
Views: 1843

Pietenpol-List: DNA analysis please

<r>Original Posted By: "M. Zeke Zechini" <br/> >> > To: pietenpol-list(at)matronics.com> >> WilliamTCA(at)aol.com>> >> > Brian,> > You are correct on the limits of compression increase on flatheads. The> point I was trying to make is that Kenny's HP per cubic inch at 6.5:1> should be better than the...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Which one?
Replies: 23
Views: 2027

> Re: Pietenpol-List: Re: Which one?

Original Posted By:> steven.d.dortch(at)gmail.com
> Subject: Re: Pietenpol-List: Re: Which one?
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Vasek's production of Historic Propellers
Replies: 7
Views: 674

Re: Pietenpol-List: Re: Vasek's production of Historic Propellers

<r>Original Posted By: Steven Dortch <br/> >>>> > To: pietenpol-list(at)matronics.com>> >>> WilliamTCA(at)aol.com>>> >>> > Brian,>> > You are correct on the limits of compression increase on flatheads. The>> point I was trying to make is that Kenny's HP per cubic inch at 6.5:1>> should be better tha...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: > Pietenpol-List: It's been 85 years=2C ya know....
Replies: 1
Views: 1133

<r>Original Posted By: "Boatright, Jeffrey" <br/> > To: pietenpol-list(at)matronics.com> > > Just kicking around and idea....> > In '09=2C for the 80th anniversary of the "Air Camper" several of us flew as a group to Oshkosh. We made a humble little statement that Pietenpols and their builders are a...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: 85 years
Replies: 25
Views: 1404

Pietenpol-List: Re: 85 years

<t>Original Posted By: "taildrags" <br/> cation:- Frazier Lake Airpark- 1C9 (near Hollister CA)=0A=0AOur host is Charlie Miller who is based at Frazier Lake.- =0A=0AMore to come in the coming days!=0A=0AMike Groah=0ATulare CA =0A414MV=0A=0A=0A=0A=0A=0AOn Thursday, March 13, 2014 6:18 AM, AircamperN1...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: advice on how to fix an error
Replies: 5
Views: 584

<r>Original Posted By: Charles Burkholder <br/> > To: pietenpol-list(at)matronics.com> m>> > I am laying out the sides of my fuselage and realized this morning that I made an error. On the left side interior=2C I accidentally glued a small gusset to the first joint behind the pilot's seat. Now I rea...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Instrument mounting hint
Replies: 7
Views: 627

Pietenpol-List: Instrument mounting hint

Original Posted By: steven.d.dortch(at)gmail.com
Subject: Pietenpol-List: Instrument mounting hint
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Honda CB350 wheel modification directions
Replies: 18
Views: 4128

Re: Pietenpol-List: Honda CB350 wheel modification directions

<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> a>> > I hope this works it is my first attempt to post a file> > As requested here is my notes on modifying the wheels used on my airplane> > --------> Brian Kenney> > > > > Read this topic online here:> > <URL url="htt...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Honda CB350 wheel modification directions
Replies: 18
Views: 4128

RE: Pietenpol-List: Honda CB350 wheel modification directions

Original Posted By: larharris2(at)msn.com
=0A=0A=0ANo not a photo on West Coast Piet but a Piet from the west coast. It was in a magazine and the owner was from the S.F. area and the registration was something like N113 but that is all from memory. I probably still have the article.
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Old BPA newsletters
Replies: 16
Views: 4020

<r>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> a>> > This is an idea for discussion. I have a large binder of Buckeye Pietenpol Newsletters. I would like to see them scanned and put somewhere on the net for public access. There is a lot of timeless information ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Old BPA newsletters
Replies: 16
Views: 4020

Pietenpol-List: Re: Old BPA newsletters

<r>Original Posted By: "jarheadpilot82" <br/> > > arthlink.net>> > > > This has been hashed over many times in the past. Grant McClaren, a > > past publisher of the BPA News, won't allow this type of copying. > > It's too bad, but he feels that he was done wrong by the Piet > > community some years ...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Old BPA newsletters
Replies: 16
Views: 4020

Re: Pietenpol-List: Old BPA newsletters

<t>Original Posted By:> kipandbeth(at)earthlink.net<br/> As I said=2C this has all been discussed before=2C it's in the archives. He asserts the rights to all the issues that were published by him=2C he essentially WAS the BPA at the time=2C and copyright law is pretty clear that he can assert those...
by matronics
Fri Apr 28, 2017 9:38 pm
Forum: Old Forum Archive
Topic: Pietenpol-List: Old BPA newsletters
Replies: 16
Views: 4020

> > Pietenpol-List: Old BPA newsletters

<r>Original Posted By: "Gary Boothe" <br/> > > To: pietenpol-list(at)matronics.com> >> > >> > This is an idea for discussion. I have a large binder of Buckeye> Pietenpol Newsletters. I would like to see them scanned and put somewhere> on the net for public access. There is a lot of timeless informat...