Search found 81779 matches
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Re: Engines
- Replies: 84
- Views: 11423
<r>Original Posted By: Michael Perez <br/> > To: pietenpol-list(at)matronics.com> > > OK... sorry... I found out that the Kiwi Piet uses the Toyota 22R engine but that still doesn't help figure out how much power it's making. They are variously rated at 97-108 HP at 4800-5000 RPM.> > --------> Oscar...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Coulda, Ca Old Time Fly In..July 19
- Replies: 22
- Views: 3161
Pietenpol-List: Re: Air Camper plans
<r>Original Posted By: "curtdm(at)gmail.com" <br/> tenpol-List: Aluminum Wing Strut/Jury Strut Attachment=0A>To: pietenpol-list(at)matronics.com=0A>=0A>=0A>=0A>I have the smaller aluminum wing struts from Carlson Aircraft, (1.00" X 2.44") and will also be using their jury struts. My questions are on...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Checkride!!
- Replies: 16
- Views: 2958
Pietenpol-List: Re: Checkride!!
<t>Original Posted By: "aabreu" <br/> Subject: Pietenpol-List: Gary Boothe & EAA Chapter win spot landing and flour bombing competition!What great photos and such a great report Gary of your flight to the Golden West fly-in! I=C3=A2=82=AC=84=A2ll bet your grandson was bragging to all his friends...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Piet list statistics
- Replies: 4
- Views: 1327
Pietenpol-List: Re: Piet list statistics
<t>Original Posted By: "giacummo" <br/> > To: pietenpol-list(at)matronics.com> > > Lorenza=2C thanks for the thoughts. How did you handle the transition from the 1/4=A4=9D flooring to the 1/8=A4=9D gussets?> > --------> John Francis ___________________________________________________________________...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Re: Progress Report
- Replies: 30
- Views: 3766
<r>Original Posted By: "Greg Cardinal" <br/> > To: pietenpol-list(at)matronics.com> > > I know that some of you have seen this on Facebook... but for those that don't frequent the site=2C here is a recent photo of my progress. Things have been a bit slow for a few months due to a variety of reasons=...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: 3 Piece Wing Question
- Replies: 14
- Views: 2883
RE: Pietenpol-List: 3 Piece Wing Question
<t>Original Posted By: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <br/> etenpol-list(at)matronics.com>Subject: RE: Pietenpol-List: 3 Piece Wing QuestionGrant,My center section spars and L & R wing panel spar ends do not butt up against each other. I respect Jack Phillips mechanical load...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Wood gear legs.
- Replies: 13
- Views: 2361
<t>Original Posted By: "Jack Phillips" <br/> Those who are operating on wood gear legs.... Did you glue the spruce legs to the ash blocks or did you rely on the steel fittings and bolts to make the connection? Yes I know=2C small work space but it's warm=2C dry and ten steps from the kitchen! Scott ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Rudder horns
- Replies: 20
- Views: 3154
Pietenpol-List: Re: Perez's Build Status
<r>Original Posted By: "aerocarjake" <br/> etenpol-list(at)matronics.com>Subject: Re: Pietenpol-List: Re: nice Piets for salewhat does the word might mean? is he looking for a piet or not? I keep reading reading might in this news letter. the word might means nothing. a couple of months ago another ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Mag needed for an A75
- Replies: 19
- Views: 3111
<r>Original Posted By: Michael Perez <br/> > To: pietenpol-list(at)matronics.com> > > A theoretical question for any of you who might be able to help me understand the HST (sales tax). Let's say I buy an airplane from a guy in Ontario. He de-registers the Canadian-registered aircraft and I bring it ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: giblets
- Replies: 37
- Views: 5295
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Piet project for sale?
- Replies: 6
- Views: 1736
Pietenpol-List: Re: Piet project for sale?
<r>Original Posted By: "jarheadpilot82" <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Tom=2C> > I will be the first to ask it=2C as I am sure others are thinking it. Are you sure you want to sell? Plenty of builders have put their projects aside for long periods of time. Ask Kevin Purte...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: giblets
- Replies: 37
- Views: 5295
Re: Pietenpol-List: giblets
Original Posted By: Ken Bickers
============= ________________________________________________________________________________Date: Mon, 31 Mar 2014 22:53:04 -0400Subject: Re: Pietenpol-List: giblets
============= ________________________________________________________________________________Date: Mon, 31 Mar 2014 22:53:04 -0400Subject: Re: Pietenpol-List: giblets
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: giblets
- Replies: 37
- Views: 5295
Pietenpol-List: Re: giblets
<r>Original Posted By: "jarheadpilot82" <br/> > > To: pietenpol-list(at)matronics.com> >> >> > I wonder how my pietie would fly if I didn't cover the fuse>> *<URL url="http://www.matronics.com/N========================">http://www.matronics.com/N========================</URL> > forums.matronics.com/...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
- Replies: 42
- Views: 5775
RE: Pietenpol-List: Airplane Weights
<t>Original Posted By: glenschweizer(at)yahoo.com<br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s A...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Elevator droop
- Replies: 7
- Views: 1697
Pietenpol-List: Corvair Mounts
<t>Original Posted By: "john francis" <br/> >> >> >> >> Uh Oh........here are some photos of a to-the-plans, properly-built (and powered) Pietenpol in flight. If I am not mistaken, I detect some elevator droop in all of them. You know, there are consequences, to making changes to the original genuin...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Re: Pietenpol-List: Elevator droop...zoom in
- Replies: 1
- Views: 926
Re: Pietenpol-List: Elevator droop...zoom in
<t>Original Posted By: "M. Zeke Zechini" <br/> > > > > Uh Oh........here are some photos of a to-the-plans, properly-built (and powered) Pietenpol in flight. If I am not mistaken, I detect some elevator droop in all of them. You know, there are consequences, to making changes to the original genuine...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Elevator droop
- Replies: 7
- Views: 1697
Re: Pietenpol-List: Elevator droop
<t>Original Posted By: Gary Boothe <br/> =0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0AUh Oh........here are some photos of a to-the-plans=2C properly-built (and powered) Pietenpol in flight. If I am not mistaken=2C I detect some elevator droop in all of them.=0AYou know=2C there are consequences=2C t...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
- Replies: 7
- Views: 16980
<r>Original Posted By: "Gary Boothe" <br/> > To: pietenpol-list(at)matronics.com> .com>> > My theory of the elevator droop is it could be an optical illusion. The outboard line from the elevator and horizontal stabilizer is bent because of the leading edge of the horizontal stabilizer not having the...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
- Replies: 7
- Views: 16980
<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> > > Cliff=2C> > In response to your question=2C "Doesn't everything below it act like a > pendulum? > > The short answer is NO=2C that said=2C some explanation is required...> > In a properly designed and built airplane...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Here Is An Interesting Read
- Replies: 2
- Views: 1083
Pietenpol-List: Here Is An Interesting Read
<r>Original Posted By: "jarheadpilot82" <br/> > > Good discussion thread on Weight and Balance. I have just received my package from Doc Mosher with WWs articles. Well documented info on CG and axle location. Keeping the CG location in mind as I build will have a high priority. I have much more to s...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
- Replies: 21
- Views: 11082
<t>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Lorenzo=2C> > I did a little "dumpster diving" on the internet and found a guy's estimate from Better Aircraft Fabric for the Oratex 6000 dated September 2013. It shows the price for the 1800mmX1m mat...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
- Replies: 21
- Views: 11082
RE: Pietenpol-List: Airplane Weights
<r>Original Posted By: larharris2 Harris <br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s Aerothane...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
- Replies: 21
- Views: 11082
Re: Pietenpol-List: Airplane Weights
<t>Original Posted By: jack(at)bedfordlandings.com<br/> Hi Lorenzo I looked at the Oretex website. When checking prices=2C I became discouraged when all they said was "compared to other finishing systems=2C the cost of spray guns=2C compressor setting up a booth...blah blah blah Oretex is comparable...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
- Replies: 21
- Views: 11082
Pietenpol-List: Airplane Weights
<t>Original Posted By: Michael Perez <br/> =0A=0A=0AGood discussion thread on Weight and Balance. I have just received my package from Doc Mosher with WWs articles. Well documented info on CG and axle location. Keeping the CG location in mind as I build will have a high priority. I have much more to...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
- Replies: 42
- Views: 5775
Pietenpol-List: Re: Airplane Weights
<t>Original Posted By: "jarheadpilot82" <br/> > > Lorenzo,> > > > My Pietenpol came in at 745 lbs., which was about 80 lbs more than I was expecting. I believe most of that extra weight was in the paint that I chose, PolyFiber=99s Aerothane polyurethane. It is very heavy, and difficult to paint. I e...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel tanks
- Replies: 42
- Views: 5775
RE: Pietenpol-List: Airplane Weights
<t>Original Posted By: larharris2 Harris <br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ALorenzo=2C=0A=0A =0A=0AMy Pietenpol came in at 745 lbs.=2C which=0Awas about 80 lbs more than I was expecting. I believe most of that extra=0Aweight was in the paint that I chose=2C PolyFiber=92s Aerothane...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
- Replies: 7
- Views: 16980
<r>Original Posted By: Michael Perez <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Brian=2C> > I am not getting your logic-> > "Your weight has nothing to do with it. You simply don't fly if there is an aft CG and having the fuel in the wing just makes the problem worse."> > Fuel in the...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: Re: Speaking of outdated stuff? Center section f
- Replies: 7
- Views: 16980
<r>Original Posted By: "Cuy, Michael D. (GRC-RXD0)[Vantage Partners, LLC]" <br/> > To: pietenpol-list(at)matronics.com> tmail.com>> > Oscar=2C> > Thanks for the input. Your clear explanation was the reason for my question. It sounds like running your nose tank low puts the non-standard weighing guy ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section fuel
- Replies: 21
- Views: 11082
RE: Pietenpol-List: Re: Speaking of outdated stuff? Center section
<t>Original Posted By: owner-pietenpol-list-server(at)matronics.com=0A<br/> =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0ATerry=2C=0Ayou can see the effects of what you are asking using the spreadsheet I posted=0Ayesterday. If you just swap the values for the fuel tank and the baggage=0Ac...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Combustible lines
- Replies: 5
- Views: 3997
Pietenpol-List: Steel-tube fuselage update - landing gear welded
<t>Original Posted By: "aerocarjake" <br/> =0A=0A=0AThere is another discussion starting suggesting that the fuselage is the right place for the tank. Please read that.Rubber hoses are still in the mainstream of certified aircraft. They are reliable and easy to purchase but be sure you get the right...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Combustible lines
- Replies: 5
- Views: 3997
<r>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> m>> > Hello=2C> > Like allways asking for something... I build a wing tank=2C and I want to know if the lines (from the tank to de gascolator) could be of rubber. I ask because i never saw any one of this kind=2C a...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Speaking of outdated stuff? Center section fuel tanks
- Replies: 2
- Views: 896
Re: Pietenpol-List: Speaking of outdated stuff? Center section fuel tanks
<t>Original Posted By: Lion Mason <br/> =0A=0A=0A=0A=0A=0A=0A=0AScott Knowlton=97your new nose fuel tank looks great! Way to go. =0A=0A =0ASpeaking of outdated items and things that could be considered unsafe or obsolete----let us rethink Bernie=92s putting fuel up in the=0Awing right over the passe...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: Re: you don't need a static port or static line
- Replies: 1
- Views: 2816
Pietenpol-List: Re: you don't need a static port or static line on a Pietenpol
<r>Original Posted By: "bdewenter" <br/> > To: pietenpol-list(at)matronics.com> >> > Mike=2C> > Perhaps the reason why Tony Bingelis gets high marks in your book is because what you were looking for just happened to be his strength=2C namely information on simple plans built plane with a Continental...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Airspeed indicator
- Replies: 12
- Views: 1829
Pietenpol-List: See you at Brodhead
<r>Original Posted By: "William Wynne" <br/> > To: "pietenpol-list(at)matronics.com" > Subject: Re: Pietenpol-List: Airspeed indicator>> I get the same eye roll here everyday especially when cxed checks come> in from aircraft spruce and wicks.. the ac 43 13 1b is on line at faa.govforfree.. I hate e...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Plywood
- Replies: 85
- Views: 9331
Pietenpol-List: Re: 4130 tubing laying around
<r>Original Posted By: "William Wynne" <br/> > To: pietenpol-list(at)matronics.com> >> > Builders=2C> > Six months ago I was sent a very nice hat from EAA HQ=2C one of the new ones with the traditional logo. It was something of an olive branch=2C as I had worked as a staff writer for many years=2C b...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: > Pietenpol-List: It's been 85 years=2C ya know....
- Replies: 1
- Views: 2593
<r>Original Posted By: "Boatright, Jeffrey" <br/> > To: pietenpol-list(at)matronics.com> > > Just kicking around and idea....> > In '09=2C for the 80th anniversary of the "Air Camper" several of us flew as a group to Oshkosh. We made a humble little statement that Pietenpols and their builders are a...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Which one?
- Replies: 23
- Views: 4355
Re: Pietenpol-List: Re: Which one?
<r>Original Posted By: danhelsper(at)aol.com<br/> > To: pietenpol-list(at)matronics.com> >> > Kenny=2C> I watched the Youtube clip several times=2C and I think you are doing something pretty neat. I have been a life long fan of flatheads=2C Grace and I have a little collection in the hangar.> > I re...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
- Replies: 21
- Views: 4414
<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> >> > Brian=2C> You are correct on the limits of compression increase on flatheads. The point I was trying to make is that Kenny's HP per cubic inch at 6.5:1 should be better than the Ford HP per cubic inch at 4.25 to 5....
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
- Replies: 21
- Views: 4414
Pietenpol-List: DNA analysis please
<r>Original Posted By: "M. Zeke Zechini" <br/> >> > To: pietenpol-list(at)matronics.com> >> WilliamTCA(at)aol.com>> >> > Brian,> > You are correct on the limits of compression increase on flatheads. The> point I was trying to make is that Kenny's HP per cubic inch at 6.5:1> should be better than the...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Which one?
- Replies: 23
- Views: 4355
> Re: Pietenpol-List: Re: Which one?
Original Posted By:> steven.d.dortch(at)gmail.com
> Subject: Re: Pietenpol-List: Re: Which one?
> Subject: Re: Pietenpol-List: Re: Which one?
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Vasek's production of Historic Propellers
- Replies: 7
- Views: 1368
Re: Pietenpol-List: Re: Vasek's production of Historic Propellers
<r>Original Posted By: Steven Dortch <br/> >>>> > To: pietenpol-list(at)matronics.com>> >>> WilliamTCA(at)aol.com>>> >>> > Brian,>> > You are correct on the limits of compression increase on flatheads. The>> point I was trying to make is that Kenny's HP per cubic inch at 6.5:1>> should be better tha...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: 85 years
- Replies: 25
- Views: 2894
Pietenpol-List: Re: 85 years
<t>Original Posted By: "taildrags" <br/> cation:- Frazier Lake Airpark- 1C9 (near Hollister CA)=0A=0AOur host is Charlie Miller who is based at Frazier Lake.- =0A=0AMore to come in the coming days!=0A=0AMike Groah=0ATulare CA =0A414MV=0A=0A=0A=0A=0A=0AOn Thursday, March 13, 2014 6:18 AM, AircamperN1...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Which one?
- Replies: 23
- Views: 4355
> RE: Pietenpol-List: Which one?
<t>Original Posted By:> owner-pietenpol-list-server(at)matronics.com<br/> > >> > There is only one Pietenpol...get the plans from the Pietenpol family. They> will have updates available not in the Flying and Glider Manual. Anything> else is not a Pietenpol.> > Gary Boothe> NX308MB> > > -----Original...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Old BPA newsletters
- Replies: 16
- Views: 9269
<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> > --> Pietenpol-List message posted by: "Brian C-FAUK" > > This is an idea for discussion. I have a large binder of Buckeye Pietenpol Newsletters. I would like to see them scanned and put somewhere on thenet for public ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Honda CB350 wheel modification directions
- Replies: 18
- Views: 9699
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Old BPA newsletters
- Replies: 16
- Views: 9269
<r>Original Posted By: larharris2 Harris <br/> > To: pietenpol-list(at)matronics.com> a>> > This is an idea for discussion. I have a large binder of Buckeye Pietenpol Newsletters. I would like to see them scanned and put somewhere on the net for public access. There is a lot of timeless information ...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Honda CB350 wheel modification directions
- Replies: 18
- Views: 9699
Re: Pietenpol-List: Honda CB350 wheel modification directions
<t>Original Posted By: brian.kenney(at)live.ca<br/> =0A=0A=0AYour writeup says that you got the idea from a photo on WestCoastPiet. Any idea of the name of the listing=2C since photos are categorized by name of the owner/builder? I think I may need all the photo reference I can get. Thanks.LorenzoSu...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
- Replies: 21
- Views: 4414
> > Re: Pietenpol-List: Re: Willys jeep pietenpol engine maybe?
<r>Original Posted By: Brian Kenney <br/> > >> >> >> > According to the Flying and Glider Piet article the Ford> > A weighs 244lb.> > According to this Wikipedia article the Willys weighs> > in at 470 lb!> > We just told a certain propmaker that he couldn't use> > his VW engine because it's too smal...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Honda CB350 wheel modification directions
- Replies: 18
- Views: 9699
Re: Pietenpol-List: Honda CB350 wheel modification directions
<r>Original Posted By: Brian Kenney <br/> > To: pietenpol-list(at)matronics.com> a>> > I hope this works it is my first attempt to post a file> > As requested here is my notes on modifying the wheels used on my airplane> > --------> Brian Kenney> > > > > Read this topic online here:> > <URL url="htt...
- Fri Apr 28, 2017 9:38 pm
- Forum: Old Forum Archive
- Topic: Pietenpol-List: Willys jeep pietenpol engine maybe?
- Replies: 21
- Views: 4414
> Re: Pietenpol-List: Re: Willys jeep pietenpol engine maybe?
<r>Original Posted By: "Douwe Blumberg" <br/> > > > According to the Flying and Glider Piet article the Ford> A weighs 244lb.> According to this Wikipedia article the Willys weighs> in at 470 lb!> We just told a certain propmaker that he couldn't use> his VW engine because it's too small and revs to...