Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
2 posts • Page 1 of 1
- Posts: 6
- Joined: Thu Feb 23, 2017 8:17 am
- Location: 2458 Cranston Rd Letts, IA 52754
As I'm building steel fuselage with ply floor on top of tube fuselage, wanted to chk I have sufficient height (above floor) for aileron-horn travel.
Mike, I suspect that using the same measurements above the ply floor as in the wood fuselage plans will work. Just a guess, mind you. My piet is wood, not steel. Good luck, Ken