I have switched projects. So, the Piet has to go. Here are details of the project. Contact details are below. Many more photos are available upon request. Project was built intending to use either a Corvair or 0-200. My shop need the room. Must sell.
(4) 14' spruce spars, 5" x .75"
Completed vertical stab and rudder (with horn)
Competed horizontal stab and elevators (with horns)
Partial mix of new AN hardware for hinges, etc
(28) completed ribs
(4) 14' spruce cut offs aprox .75" x .75"
Fir leading edge material
Fir shaped wing trailing edge material
Spruce compression strut material
Ready for cover 39" center section with hardware, pulleys, etc
3 piece wing spar attach straps
Bill Rewey rib lofting and documentation
Finish Welded, Unpainted Fuselage:
Finish welded fuselage
Landing gear (1.25") with axle nuts
Piper landing gear shock struts
Control system, sticks, rudder pedals, bell cranks
Marked GN-1 construction prints
Wheels/brakes NOT included
• Pick up, located in Lake City, Florida or buyer pays for shipping.
• Extensive photos of project are available upon request
• Contact Mark at: 386-466-0997 email@example.com
For Sale and Wanted ads for Pietenpol related items may be posted here. Please remember to manage your ads when your items are sold.
1 post • Page 1 of 1