Page 1 of 1
Ken Perkins Piet
Posted: Mon May 22, 2017 11:30 am
by Richard Roller
HI everyone. I thought that I would try to upload some pictures of Ken Perkins Piet, N34KP. Ken has been a great friend of mine through the years. He is a wonderful mechanic and machinist. There are many parts flying around on various Piets that were made by Ken. I've been fortunate that Ken has taken me under his wing (so to speak), taught me many things, and of course the ultimate present, lets me fly his Piet.
Re: Ken Perkins Piet
Posted: Thu May 30, 2019 9:03 pm
by tstinemetze@cox.net
Glad to say that I will have quite a few "Perkins Parts" on my plane (if I ever get it done.) My visit to Ken's home/machinist's den was very inspirational.
Re: Ken Perkins Piet
Posted: Tue Jun 04, 2019 9:29 pm
by KenBickers
Tom, how about a progress report or some pictures? Nothing like some atta-boys to get things moving again. Cheers, Ken
Re: Ken Perkins Piet
Posted: Tue Jun 04, 2019 10:18 pm
by Spaghetti
Where did Ken”s Piet go after his passing?
Re: Ken Perkins Piet
Posted: Mon Jun 24, 2019 3:10 pm
by Richard Roller
I have Ken's Piet.
Posted: Sat Feb 01, 2020 3:40 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:41 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:43 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:45 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:48 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:51 am
by newoldpietenpol
Posted: Sat Feb 01, 2020 3:53 am
by newoldpietenpol
Re: Ken Perkins Piet
Posted: Sun Feb 02, 2020 8:45 am
by Richard Roller
Thanks so much for posting all these pictures. Fantastic!
Re: Ken Perkins Piet
Posted: Thu Dec 17, 2020 2:47 pm
by Hootis
I cant get these pics to load, are they still available?
Re: Ken Perkins Piet
Posted: Thu Dec 17, 2020 5:09 pm
by Pat Weeden
Hootis wrote: ↑Thu Dec 17, 2020 2:47 pm
I cant get these pics to load, are they still available?
There are a lot of pictures, so it may take a few minutes, but they should load.