st(at)matronics.com=0ASent: Thu, July 8, 2010 2:30:25 PM=0A Pietenpol-

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

st(at)matronics.com=0ASent: Thu, July 8, 2010 2:30:25 PM=0A Pietenpol-

Post by matronics »

Original Posted By: H RULE
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Pietenpol-List: Re: center flop thoughts

Post by matronics »

Original Posted By:> taildrags(at)hotmail.com
yep - this is what I planned on doing. A "lip" or gap seal over the top attached to the flop and one underneath attached to the wing. My gap should be around 2"> Subject: Pietenpol-List: Re: center flop thoughts
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: Jim Markle
> To: pietenpol-list(at)matronics.com> > > Now=2C see... Harvey's setup addresses the wide wing gaps at the flop by incorporating wing gap seal strips on the flop itself. Very nice solution.> > --------> Oscar Zuniga> San Antonio=2C TX> Air Camper NX41CC> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 220#304220> > > > > > > ============================================> > > ________________________________________________________________________________Date: Thu, 8 Jul 2010 20:52:24 -0500 (GMT-05:00)
Locked