Pietenpol-List: model A mount problem
Posted: Mon Nov 17, 2014 8:51 am
Original Posted By: "Boatright, Jeffrey"
Hey Stu,I don't remember exactly what we did, but I DO remember the clearance wastight!First I'd suggest you look at a lot of ford installations onwestcoastpiet.com and see if there are any pics to help you out.Would it work if you ground off part of the bolt head and part of thewasher?My ford installation is now a continental so I don't have it in front of me.I know I didn't use the springs. The engine layed on top of strips ofvibration absorbing rubber-type material and then had the same thing underthe bolt head washer.Good luck,Douwe________________________________________________________________________________
Hey Stu,I don't remember exactly what we did, but I DO remember the clearance wastight!First I'd suggest you look at a lot of ford installations onwestcoastpiet.com and see if there are any pics to help you out.Would it work if you ground off part of the bolt head and part of thewasher?My ford installation is now a continental so I don't have it in front of me.I know I didn't use the springs. The engine layed on top of strips ofvibration absorbing rubber-type material and then had the same thing underthe bolt head washer.Good luck,Douwe________________________________________________________________________________