Original Posted By: hyvris(at)gmail.com
Welcome=2C Petr.Maybe others will disagree=2C but I did not care about direction of grain in the gussets. Gusset material is plywood. Interior layers of the ply will have grain direction 90 degrees to the surface ply. I tried to cut my gussets to make the best use of my material=2C with the least waste.LorenzoDate: Sat=2C 23 Jan 2016 15:34:14 +0100Subject: Pietenpol-List: gussets grain orientation - empenage (rudder=2Cfin=2Celevator=2Cstabilizator)
An archive of the Matronics Pietenpol Listserve.
1 post • Page 1 of 1