=0A Pietenpol-List: Nylo-seal=0Aoil pressure line? =0A=0A=0A=0A =C2

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

=0A Pietenpol-List: Nylo-seal=0Aoil pressure line? =0A=0A=0A=0A =C2

Post by matronics »

Original Posted By: Dan Yocum
=0A=0A=0A =0A =0A=0A =0A=0A=0A=0A=0A=0A=0A=0AI ran copper tubing.=C2- 210 hours and=0Aall=99s well. =0A=0A =C2- =0A=0AJack=0A Phillips =0A=0ANX899JP =0A=0ARaleigh, NC =0A=0A =C2- =0A=0A=0A=0A=0A=0A=0A=0A=0A=0AFrom:=0A owner-pietenpol-list-server(at)matronics.com [mailto:=0A owner-pietenpol-list-server(at)matronics.com ] On Behalf Of Woodflier(at)aol.com=0ASent: Tuesday, October 12, 2010=0A4:27 PM=0ATo: pietenpol-list(at)matronics.com=0ASubject: Pietenpol-List: Nylo-seal=0Aoil pressure line? =0A=0A=0A=0A =C2- =0A=0A=0A=0AOk, I bought the A/C Spruce oil pressure=0Aline kit, and after I get it and start looking at the Nylo-Seal tubing, it says=0A"max temp 212 degrees." I went with the nylon because I thought it=0Awould withstand the vibration better than copper. But the temp rating for the=0Anylon worries me, as does something I read recently in one of Tony Bengalis's=0Aarticles on the EAA site that you don't want flammable liquids running through=0Atubing that can burn through and feed an engine fire. =0A=0A=0A=0A=0A=0A=C2- =0A=0A=0A=0A=0A=0AI feel kinda dumb with the Piet in the=0Afinal stages but there's a way I can run copper tubing or Aeroquip 303 rubber=0Abraided hose. =0A=0A=0A=0A=0A=0A=C2- =0A=0A=0A=0A=0A=0AWhat would y'all do? =0A=0A=0A=0A=0A=0A=C2- =0A=0A=0A=0A=0A=0AMatt Paxton =0A=0A=0A=0A=0A=0A=C2- =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A=0A =0A=0A=0A=0A =C2- =C2-http://www.matronics.com/Navigator?Piet ... ntribution =C2- =0A=0A=0A=0A=0A=0A=0A=0A=0A=0A ________________________________________________________________________________
Locked