Pietenpol-List: Fir available in Minneapolis

[matronics]

Original Posted By: "Dick N"
Hey all=2CI have a couple of boards of nice clear fir I could offer to someone cheap - perhaps Dick Navratril. I purchased them a while back with the intentions of using them for spars but they didn't pan out. They'd make good material for the fuselage=2C ribs=2C tail=2C etc. but without a bunch of glue up=2C they wouldn't make good spars. Looking to get $50 for the 3+ boards that are 3/4 thick=2C x 4 3/4" wide x 16'-0" long.Lemme know if you're interested - I don't want to ship so you'd have to pick them up. If I don't sell=2C I'm thinking it will feed another project for someone (perhaps me) down the road=2C but currently I have all that I can do to work on my current project which was started in 2001 and is on schedule to complete sometime before the next century.Tom B. ________________________________________________________________________________

[matronics]

Original Posted By: TOM MICHELLE BRANT
Sorry Tom, I dont need any right now.Dick N. ----- Original Message -----