Pietenpol-List: Honda CB350 wheel modification directions

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: Brian Kenney
I hope this works it is my first attempt to post a fileAs requested here is my notes on modifying the wheels used on my airplane--------Brian KenneyRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/whee ... __________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: Steven Dortch
Subject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By:> brian.kenney(at)live.ca
Thanks for this post. I am in the process of doing this. Your techniques will be valuable to me.Lorenzo> Subject: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: Brian Kenney
The wheels I have are on the wood straight axle gear. they are now 27 years young..Sent from my iPad> On Mar 8, 2014, at 1:49 PM, "Steven Dortch" wrote:> > Brian, it did load well. I could open it.> > Is this for the Piper cub style gear?> > Blue Skies,> Steve D> > >> On Sat, Mar 8, 2014 at 12:32 PM, Brian C-FAUK wrote:a>>> >> I hope this works it is my first attempt to post a file>> >> As requested here is my notes on modifying the wheels used on my airplane>> >> -------->> Brian Kenney>> >> >> >> >> Read this topic online here:>> >> http://forums.matronics.com/viewtopic.p ... 992#419992>> >> >> >> >> Attachments:>> >> http://forums.matronics.com//files/wheel_mod_801.docx>> >> >> >> >> ==========>> st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List>> ==========>> http://forums.matronics.com>> ==========>> le, List Admin.>> ="_blank">http://www.matronics.com/contribution>> ==========> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Subject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> > Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By:> > brian.kenney(at)live.ca
I will be doing it again for I friend. I will take some pictures as I go. Sent from my iPad> On Mar 8, 2014, at 2:14 PM, "larharris2 Harris" wrote:> > Thanks for this post. I am in the process of doing this. Your techniques will be valuable to me.> > Lorenzo> > > > > Subject: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: brian.kenney(at)live.ca
Your writeup says that you got the idea from a photo on WestCoastPiet. Any idea of the name of the listing=2C since photos are categorized by name of the owner/builder? I think I may need all the photo reference I can get. Thanks.LorenzoSubject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: larharris2(at)msn.com
No not a photo on West Coast Piet but a Piet from the west coast. It was in a magazine and the owner was from the S.F. area and the registration was something like N113 but that is all from memory. I probably still have the article.
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: brian.kenney(at)live.ca
I found a picture of the airplane - It is N3133
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Re: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: "Bill Church"
This has been hashed over many times in the past. Grant McClaren, a past publisher of the BPA News, won't allow this type of copying. It's too bad, but he feels that he was done wrong by the Piet community some years ago & asserts his copyright rights.Kip GardnerOn Mar 8, 2014, at 5:04 PM, Brian C-FAUK wrote:> >>> This is an idea for discussion. I have a large binder of Buckeye > Pietenpol Newsletters. I would like to see them scanned and put > somewhere on the net for public access. There is a lot of timeless > information in them. I would be willing to do some or all of the > work to do this but I have no idea the best way to do this and what > the reaction would be if I did it. Your comments are welcome.>> Perhaps this has already been discussed.>> --------> Brian Kenney>>> Read this topic online here:>> http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: larharris2 Harris
For anyone interested, attached are a few photos of what the finished product lookslike.Bill C.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/2006 ... __________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Pietenpol-List: Re: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By:> billspiet(at)sympatico.ca
Thank you. Very helpful.Lorenzo> Subject: Pietenpol-List: Re: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: Brian Kenney
> To: pietenpol-list(at)matronics.com> a>> > I hope this works it is my first attempt to post a file> > As requested here is my notes on modifying the wheels used on my airplane> > --------> Brian Kenney> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 992#419992> > > > > Attachments: > > http://forums.matronics.com//files/wheel_mod_801.docx> > > > ============================================> > > ________________________________________________________________________________Subject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: "Greg Cardinal"
> > To: pietenpol-list(at)matronics.com> > ca>> > > > I hope this works it is my first attempt to post a file> > > > As requested here is my notes on modifying the wheels used on my airplane> > > > --------> > Brian Kenney> > > > > > > > > > Read this topic online here:> > > > http://forums.matronics.com/viewtopic.p ... 992#419992> > > > > > > > > > Attachments: > > > > http://forums.matronics.com//files/wheel_mod_801.docx= Archive Search & Download, 7-Day Browse, Chat, FAQ,> &g= --> http://www.matronics.com/Navigator?Pietenpol-List> > ========================> > > > > > > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: Kip and Beth Gardner
I will be doing it again for I friend. I will take some pictures as I go. ________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: brian.kenney(at)live.ca
=0A=0A=0AYour writeup says that you got the idea from a photo on WestCoastPiet. Any idea of the name of the listing=2C since photos are categorized by name of the owner/builder? I think I may need all the photo reference I can get. Thanks.LorenzoSubject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: larharris2(at)msn.com
=0A=0A=0ANo not a photo on West Coast Piet but a Piet from the west coast. It was in a magazine and the owner was from the S.F. area and the registration was something like N113 but that is all from memory. I probably still have the article.
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Honda CB350 wheel modification directions

Post by matronics »

Original Posted By: brian.kenney(at)live.ca
=0A=0A=0AYour writeup says that you got the idea from a photo on WestCoastPiet. Any idea of the name of the listing=2C since photos are categorized by name of the owner/builder? I think I may need all the photo reference I can get. Thanks.LorenzoSubject: Re: Pietenpol-List: Honda CB350 wheel modification directions
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: Kip and Beth Gardner
I will be doing it again for I friend. I will take some pictures as I go. =0A=0A=0A=0A============0Ast" target="_blank">http://www.matronics.com/Navigator?Piet ... =====0A=0A =0A=0A=0A=0A============0A============0A============0A============0A=0A ________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: Kip and Beth Gardner
> To: pietenpol-list(at)matronics.com> ca>> > For anyone interested=2C attached are a few photos of what the finished product looks like.> > Bill C.> ________________________________________________________________________________
Locked