Hot air and tail pipes

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
danoliver
Posts: 56
Joined: Sat Feb 25, 2017 7:58 am
Location: Cincinnati

Hot air and tail pipes

Post by danoliver »

702F1E57-3E67-430E-91AD-F76226BE47A0.jpeg
I’m in the process of fabricating my exhaust and am curious to hear from folks with real world experience. How short could I cut down the tailpipe without blowing too much hot air onto the fabric?

Any advice would be greatly appreciated.

And any advice specifically pertaining to exhaust set ups would be even more greatly appreciated. :D
Post Reply