N34KP's rebuild
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
Back from visiting my sisters and mother. I planed the doublers on the lower right longeron this morning. Time to glue up the lower left.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
Glued up the lower left longeron doublers today.
-
- Posts: 57
- Joined: Tue Oct 24, 2023 6:01 am
Re: N34KP's rebuild
Nice work, Richard. I'm a machinist, not a woodworker, but have been learning about hand planes on this Piet project. It's strangely satisfying watching a chip roll of them.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
The rear splices are complete. Station piece and pulling them together at the tail post next.
Re: N34KP's rebuild
Richard; do you plan to refit the tailspring and other fittings that require holes back there before varnishing the wood?
-Oscar
-Oscar
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
Oscar. Yes I do plan on drilling before refinishing. I still have a drill guide, made out of 1" key stock, that I made for the longeron repair from 5 years ago.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
Station piece, diagonal and doublers. Late night glue up.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
I glued in the old tailpost last night. Gussets next.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
Looks like an airplane, from nose to tail.
-Oscar
-Oscar
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
The tail reconstruction is finished except for fairing strips and holes for the fittings.
Last edited by Richard Roller on Mon Apr 29, 2024 12:59 pm, edited 1 time in total.
Re: N34KP's rebuild
That's gotta be a great feeling, Richard. I know it was a great feeling for me every time I completed a subassembly back when I was making repairs to my Air Camper. Patience and determination will eventually win the day.
-Oscar
-Oscar
- Richard Roller
- Posts: 254
- Joined: Mon May 22, 2017 11:14 am
- Location: Olathe, Ks.
Re: N34KP's rebuild
The holes for the forward tailwheel brackets are drilled.