Pietenpol-List: Re: Piet Builder Identity

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Rick Holland
OK, all you creative geniuses who plan on making it to Brodhead, see if you can come up with some type of Identity device so that we can spot each other without having to stare down at your breast to see if you have a name to go with these emails.Bill Rewey suggested something that could be spotted 30 ft. away, front or back, like a certain common color wrist band or something on your hat or cap if you're wearing one, or a common color bandana or whatever.Unless you guys like to stare down at other guys breasts ?????Roman Bukolt ----- Original Message -----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: "Jack T. Textor"
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Shad Bell: Tractor Pull Competition

Post by matronics »

Original Posted By: "Jack T. Textor"
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Jack T. Textor
The "ID Tag" would have to be something that everyone can readily conjure up no matter what part of the jungle they habitat. Propellor Beanies? Good Idea but I haven't seen one in 50 yrs.Somethingt to hang on a belt loop or the belt? A red ribbon or large nut with a nylon tie? Your propellor strapped across your back? Maybe not.Think !!! ----- Original Message -----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: brass dataplates

Post by matronics »

Original Posted By: "Douwe Blumberg"
Dick wrote->I want to order 3 of your beautiful data plates, but I can't remember>the important info. What is your address and how much?Dick (and anyone else who wants one)- complete info is available at http://www.flysquirrel.net/piets/dataplate.html including information from Brian Amato on the original aluminum plates. Note that Brian's aluminum plates say, "THE ORIGINAL MODEL 'A' POWERED LIGHTPLANE" while my brass ones say, "LOW AND SLOW SINCE 1929". I figured that since I have an A65 on my Piet and a whole bunch of other folks have engines other than the Ford on theirs, the new logo might be more generic and have wider appeal.Brian's aluminum ones are $8.50, mine are $10. Both require trimming to final oval shape, engraving of the data, drilling or punching for mounting screws. Both are the same size.Oscar ZunigaSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net_________________________________________________________________Hotmail to go? Get your Hotmail, news, sports and much more! http://mobile.msn.com________________________________________________________________________________
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Roman Bukolt
How about everybody on the list that attends wear their baseball cap sideways, wear both an earring and a nose ring plus a few tatoos?----- Original Message -----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Greg Chapman
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Jack T. Textor
I made the comment earlier that if you send me a photo I can put it into the Piet Directory. Then you can print out the directory and bring it to Brodhead to id people. That was a point of frustration for me last year.Glenn W. ThomasStorrs, CThttp://www.flyingwood.com ----- Original Message -----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> ** RE: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: "Rick Holland"
> > *> > > *________________________________________________________________________________Date: Sun, 1 Jul 2007 19:03:50 -0600
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> ** RE: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: shad bell
>> *>>> *>>-- Rick HollandObjectAge Ltd.Castle Rock, Colorado________________________________________________________________________________Date: Sun, 1 Jul 2007 20:01:44 -0700 (PDT)
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: Re: Piet Builder Identity

Post by matronics »

Original Posted By: Rcaprd(at)aol.com
http://www.matronics.com/Navigator?Pietenpol-List http://forums.matronics.com ---------------------------------The fish are biting. Get more visitors on your site using Yahoo! Search Marketing.________________________________________________________________________________
Locked