Original Posted By: "bender"
I was just about to mention that you should verify the accuracy of your tachometer,but it looks like you have already thought of that. Sounds like a good plan,it's always good to verify information like that so that you don't damageyour engine, or worse...Have you considered carving your own prop? Several people on this list have doneit, this way you can get the exact prop that you want at substantial savings.Dan Helsper offers a really well put together CD on prop carving that is wellworth the price if you are interested in trying this out for yourself.--------Billy McCaskillUrbana, ILtail section almost done, starting on ribs soonRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: model a heads
Pietenpol-List: model a heads
Original Posted By: SENTUCHOWS(at)aol.com
Hey A Guys..i know quite a few run a single ignition on the ford.... just wondering if anyonehas a thought on heads..i was kinda waiting on a dual plug head from snyders.. they are working on thenew casting.. and i'm on the listbut i wonder if i "need" dual ignitioni have a wico model c mag with an adjustable impulse and its hot !but i thought about a electronic "B" distributor too ... i need an electrical systemanywaybeen thinking about a winfield head... or thomas .. kinda want to stick with aluminumfor weightjeffRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Hey A Guys..i know quite a few run a single ignition on the ford.... just wondering if anyonehas a thought on heads..i was kinda waiting on a dual plug head from snyders.. they are working on thenew casting.. and i'm on the listbut i wonder if i "need" dual ignitioni have a wico model c mag with an adjustable impulse and its hot !but i thought about a electronic "B" distributor too ... i need an electrical systemanywaybeen thinking about a winfield head... or thomas .. kinda want to stick with aluminumfor weightjeffRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
> Pietenpol-List: model a heads
Original Posted By:> jfaith(at)solairusaviation.com
Talk to Pieti Lowell He seems to know more about the "A" than anyone. Lowell?Doug DeverIn beautiful Stow Ohio> Subject: Pietenpol-List: model a heads
Talk to Pieti Lowell He seems to know more about the "A" than anyone. Lowell?Doug DeverIn beautiful Stow Ohio> Subject: Pietenpol-List: model a heads
Re: Pietenpol-List: model a heads
Original Posted By: "Brett Phillips"
Subject: Re: Pietenpol-List: Re: Corvair props*Jay AndersonCLOUDCARScloudcars(at)verizon.net 325-356-2810*RyanSent from my iPhoneOn Apr 19, 2011, at 8:34 PM, skellytown flyer wrote:skellflyer1(at)yahoo.com>thanks for the tips guys- I found one fellow in Kansas that had a 66x32Sterba he loaned to a fellow and never got it back or any money. if he canget it back I may try it out and buy it if it works well.I am stillsearching for the Cloudcars site.so far no luck but if they are allscimitars- if I spelled that right I don't know how they would do on aCorvair . I expect he makes regular ones too.I'll sure try to make contactwith him.those size ranges tell me I'm on the too flat side of the range tocruise much but by careful throttle control I my be able to fly some till Icome up with one.RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: model a headsDate: Tue, 19 Apr 2011 22:01:09 -0400
Subject: Re: Pietenpol-List: Re: Corvair props*Jay AndersonCLOUDCARScloudcars(at)verizon.net 325-356-2810*RyanSent from my iPhoneOn Apr 19, 2011, at 8:34 PM, skellytown flyer wrote:skellflyer1(at)yahoo.com>thanks for the tips guys- I found one fellow in Kansas that had a 66x32Sterba he loaned to a fellow and never got it back or any money. if he canget it back I may try it out and buy it if it works well.I am stillsearching for the Cloudcars site.so far no luck but if they are allscimitars- if I spelled that right I don't know how they would do on aCorvair . I expect he makes regular ones too.I'll sure try to make contactwith him.those size ranges tell me I'm on the too flat side of the range tocruise much but by careful throttle control I my be able to fly some till Icome up with one.RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: model a headsDate: Tue, 19 Apr 2011 22:01:09 -0400