Pietenpol-List: cuting metal fittings

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: cuting metal fittings

Post by matronics »

Original Posted By: helspersew(at)aol.com
Subject: Re: Pietenpol-List: cracked fendersIn a message dated 7/9/2011 3:08:18 P.M. Central Daylight Time, taildrags(at)hotmail.com writes:--> Pietenpol-List message posted by: Oscar Zuniga >Does anyone remember when car fenders cracked from vibration/rough roads?>We had an old '29 A model and it had cracked fenders on the front. We had>a torch to weld with but Daddy waited until the cracks were 3 or 4" long>before he fixed them.Sounds like the mounting tabs on my cooling eyebrows... I should be carryinga couple of spares along with some pop rivets and a rivet puller, the way itgoes through those things.Oscar ZunigaAir Camper NX41CC "Scout"Flying Squirrel N2069Z "Rocket"Medford, ORwebsite at http://www.flysquirrel.net I should have made them out of 4130CMC________________________________________________________________________________Subject: Pietenpol-List: cuting metal fittings
Locked