Page 1 of 1

Pietenpol-List: Headset

Posted: Wed May 28, 2014 11:50 pm
by matronics
Original Posted By: Gerry Holland
This is from the 2nd Quarter 1994 Buckeye Pietenpol Association Newsletter. Isthis the idea you are talking about, Grant? If so, then it has been done before,so go for it.And for all of you people worried about copyright infringement, I give full creditfor the note as well as the drawing to Mr. Grant MacLaren.Hope this helps.--------Semper Fi,Terry HandAthens, GAUSMC, USMCR, ATPBVD DVD PDQ BBQRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/scre ... ___Subject: Pietenpol-List: Headset

Re: Pietenpol-List: Headset

Posted: Thu May 29, 2014 12:43 am
by matronics
Original Posted By: glenschweizer(at)yahoo.com
OscarHeadsets! I use a Lynx Avionics Micro System Headset. You can get them in Passive or ANR.It fits inside my Lynx Leather Helmet by design and has worked very well in open cockpit.It comes with microlight type connections but I've purchased the converter for standard jacks.List as follows:http://www.lynx-avionics.com/English_Si ... et.htmlNot cheap but have stood up to time well and Lynx have a repair scheme etc,RegardsGerry________________________________________________________________________________Subject: Re: Pietenpol-List: Headset

Re: Pietenpol-List: Re: wooden floats at SNF

Posted: Thu May 29, 2014 1:23 am
by matronics
Original Posted By: Gene Rambo
Hi everyone Check out the flybaby group. Ron Wanttaja has been working on home made headset to fit inside a leather helmet. It appears he's got it pretty dialed inSent from my iPhone> On May 28, 2014, at 10:43 PM, Gerry Holland wrote:> > Oscar> Headsets! I use a Lynx Avionics Micro System Headset. You can get them in Passive or ANR.> It fits inside my Lynx Leather Helmet by design and has worked very well in open cockpit.> It comes with microlight type connections but I've purchased the converter for standard jacks.> List as follows:> http://www.lynx-avionics.com/English_Si ... e_set.html> > Not cheap but have stood up to time well and Lynx have a repair scheme etc,> Regards> Gerry> > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Subject: Re: Pietenpol-List: Re: wooden floats at SNF