Brodhead Pietenpol Association

Original Posted By: jim hyde
Had an adventure landing yesterday when 2 of 4 landing gear bolts sheared off sogear collapsed on landing - no damage. 3rd bolt sheared when removing it toreplace all 4 with new bolts. Have photos if interested.Has anyone else had this problem and did you replace with AN3 as per drawings orenlarge to AN4s?Also - thinking of putting a safety cable in case bungy cables go. Do you knowhow long the cable should be so it doesn't interfer with the bungy travel?Happy FlyingJillRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Fri, 6 Jun 2014 08:41:08 -0700 (PDT)

Original Posted By: "Boatright, Jeffrey"
Me too pleeze. Gardiner masonSent from my iPad> On Jun 6, 2014, at 9:12 AM, "Douwe Blumberg" wrote:> > Could someone send me the newsletter pdf link?> > Pleez?> > J> > Douwe> > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________