Brodhead Pietenpol Association

Posted: **Mon Feb 08, 2016 9:28 am**

Original Posted By: "Charles N. Campbell"
You gotta talk to the IT Girl, Oscar.--------Kevin "Axel" PurteeRebuilding NX899KPAustin/San Marcos, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 8 Feb 2016 10:34:59 -0500Subject: Pietenpol-List: Engine mount bolt lengths

Posted: **Mon Feb 08, 2016 9:41 am**

Original Posted By: "Charles N. Campbell"
Subject: Re: Pietenpol-List: Engine mount bolt lengths

Posted: **Wed Feb 10, 2016 8:18 am**

Original Posted By: "bdewenter"
John,MANY of the fittings can be made from "strip steel" in various gauges, widths andlengths. You can cut these up with a simple hack saw (with the BEST bladesmoney can buy) very quickly.Obviously the larger metal fitting need to come from sheet. Consider getting yourlarger parts water jet cut.--------Bob 'Early Builder' DewenterDayton OHRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Engine mount bolt lengths