Brodhead Pietenpol Association

Original Posted By: Gardiner Mason
I'm looking for help from someone who has wired up a Pietenpol having a Corvair engine. I wonder what size wire to use from the ignition switch to the small contact (the one going to the solenoid) on the starter (the front-mounted starter sold by William Wynne.) I have misplaced the instructions for the starter. I don't remember whether they covered the wire sizes. Chuck________________________________________________________________________________

Original Posted By: Hans van der Voort
Subject: Pietenpol-List: Wire SizesI'm looking for help from someone who has wired up a Pietenpol having aCorvair engine. I wonder what size wire to use from the ignition switch tothe small contact (the one going to the solenoid) on the starter (thefront-mounted starter sold by William Wynne.) I have misplaced theinstructions for the starter. I don't remember whether they covered thewire sizes.Chuck________________________________________________________________________________Date: Tue, 6 Sep 2016 19:50:06 +0000 (UTC)