Ken Perkins Piet

Richard Roller · Post by **Richard Roller** » Mon May 22, 2017 11:30 am

HI everyone. I thought that I would try to upload some pictures of Ken Perkins Piet, N34KP. Ken has been a great friend of mine through the years. He is a wonderful mechanic and machinist. There are many parts flying around on various Piets that were made by Ken. I've been fortunate that Ken has taken me under his wing (so to speak), taught me many things, and of course the ultimate present, lets me fly his Piet.

tstinemetze@cox.net · Post by **tstinemetze@cox.net** » Thu May 30, 2019 9:03 pm

Glad to say that I will have quite a few "Perkins Parts" on my plane (if I ever get it done.) My visit to Ken's home/machinist's den was very inspirational.

KenBickers · Post by **KenBickers** » Tue Jun 04, 2019 9:29 pm

Tom, how about a progress report or some pictures? Nothing like some atta-boys to get things moving again. Cheers, Ken

Spaghetti · Post by **Spaghetti** » Tue Jun 04, 2019 10:18 pm

Where did Ken”s Piet go after his passing?

Richard Roller · Post by **Richard Roller** » Mon Jun 24, 2019 3:10 pm

I have Ken's Piet.

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:40 am

In mid-February 2012 I had the pleasure of meeting Ken Perkins and spending the entire day with him, hanging out in his shop and later at his hanger to look over his N34KP. We talked of Pietenpols, Model A and B Ford engines and home built and home building of aircraft in general. While we were at his hanger, Ken gave me free access to photograph anything I wanted.

Here are the photos I took that day.

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:41 am

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:43 am

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:45 am

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:48 am

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:51 am

newoldpietenpol · Post by **newoldpietenpol** » Sat Feb 01, 2020 3:53 am

Richard Roller · Post by **Richard Roller** » Sun Feb 02, 2020 8:45 am

Thanks so much for posting all these pictures. Fantastic!

Hootis · Post by **Hootis** » Thu Dec 17, 2020 2:47 pm

I cant get these pics to load, are they still available?

Post by **Pat Weeden** » Thu Dec 17, 2020 5:09 pm

Hootis wrote: ↑Thu Dec 17, 2020 2:47 pm I cant get these pics to load, are they still available?

There are a lot of pictures, so it may take a few minutes, but they should load.

Brodhead Pietenpol Association

Ken Perkins Piet

Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet

Re: Ken Perkins Piet