Page 1 of 1
fabric cement for pietenpol
Posted: Thu Mar 01, 2018 1:20 pm
by ralphhsd
Could some one give me an estimate of how much adhesive I need to by to fasten the fabric on my Pietenpol
Ralph in South Dakota
Re: fabric cement for pietenpol
Posted: Sat Mar 03, 2018 9:13 am
by donbrewer
I can suggest an amount if you use Stewart Systems. About 1 gallon of Ekobond and 2 gallons of Ekofill is a fairly good estimate. More Ekobond will be required if you decide to seal the fabric. That step is not required in their STC qualifications. Call Stewart System personnel directly and they can give you an accurate estimate. I highly recommend that system and believe it to be the best system, as I have used four different systems. Don Brewer