Stromberg carburetor
Stromberg carburetor
Stromberg NA-3-S1A completely overhauled and tested on flow bench. Steel needle valve, mixture adjustment, new oriface for 85 hp engine, new internal gaskets. $350 call 936 443-9163 , Cheers, Don
Last edited by donbrewer on Wed Jan 02, 2019 9:43 pm, edited 2 times in total.
Re: Stromberg carburetor
I believe I am the next owner of Don's Stromberg carb, or will be as soon as he gets my check. I love these carbs and I try to pick them up whenever one comes available. I helped someone get back in the air with a spare rebuilt Stromberg that I had on my shelf years ago, and this one will be lovingly cared for in the same way until a need arises. The one on my A65 was damaged in a nose-over incident, so it does help to have spares on hand from time to time.
Oscar Zuniga
Medford, OR
Air Camper NX41CC, A75 power
Oscar Zuniga
Medford, OR
Air Camper NX41CC, A75 power
Re: Stromberg carburetor
Don: by any chance did you know Deanie Montgomery from Corsicana? He rebuilt the first Stromberg that I flew on my A65. He was somewhat of a specialist on Strombergs. Passed away in 2012.
Re: Stromberg carburetor
Don; I just wanted to mention that I received the carb a while back. I had been out of town when it came in, then was down with a cold and crud for a week since then and I just realized that I failed to acknowledge receipt. Thank you. By the way, we discussed venturi sizes when we spoke on the phone, and I mentioned that there are several different ones. Here's the info on those variations: