Spoked Wheels on Cub Gear

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
User avatar
Pat Weeden
Site Admin
Posts: 151
Joined: Thu Feb 16, 2017 12:04 pm
Location: Oregon, Wis.
Contact:

Spoked Wheels on Cub Gear

Post by Pat Weeden »

Received via e-mail at BPA headquarters.
I just bought a Pietenpol and joined the BPA.  It looks to be from original plans, NOT a Grega. It has a Model A engine and Cub gear.  I don't care for the gear and wish to  change it to an original. For now I would like to keep the landing gear and replace the 800-4  wheels and tires with spoke wheels. I can't seem to find much information on what wheels are suitable.Can spoke wheels be installed on the cub axles?  If not, what is required?  Are plans available for the original gear as designed by BHP.  Do you have a member who would be willing to chat by phone?  I don't do this computer stuff well.  Any help you can give will be greatly appreciated. Thank you, Ralph Polnicky  405-432-8925
Pat Weeden, Site Admin
Brodhead Pietenpol Association
at7000ft
Posts: 36
Joined: Mon Mar 06, 2017 3:06 pm

Re: Spoked Wheels on Cub Gear

Post by at7000ft »

User avatar
taildrags
Posts: 637
Joined: Tue Mar 07, 2017 10:39 pm

Re: Spoked Wheels on Cub Gear

Post by taildrags »

From the area code, it looks like Ralph is in the Oklahoma City area. Jim Markle-?

-Oscar
Post Reply