cable length adjustment by twisting

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
John Slaughter
Posts: 10
Joined: Mon Mar 26, 2018 11:06 am

cable length adjustment by twisting

Post by John Slaughter »

I have seen it advised, or at least mentioned as a possibility, that structural wire cables can be adjusted in length by twisting, possibly even eliminating the turnbuckle. When I tried this at home the strands opened up in an ugly way- can any knowledgeable A & P or otherwise evaluate this idea? It doesn't seem right, but eliminating the weight and complexity of a turnbuckle is attractive...
User avatar
Richard Roller
Posts: 240
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: cable length adjustment by twisting

Post by Richard Roller »

Not a good idea at all. Twisted one way you open the lay of the cable and expose the insides to grit and dirt. The other way you tighten the twist and with the flight loads overstress the cable.
John Slaughter
Posts: 10
Joined: Mon Mar 26, 2018 11:06 am

Re: cable length adjustment by twisting

Post by John Slaughter »

Thanks Richard- just another example of "easy not being best".
Post Reply