Good morning.
I own a 1929 Model A Ford Special Coupe and recently discovered that the cylinder head is made of aluminum. A fellow Model A Ford Club member suggested that the head may have come from your organization, or that someone in your organization may know where it came from.
Specifically I am looking for the maker, the model and specifications for the cylinder head. Attached are a couple of photos of the cylinder head as installed on my Model A Ford.
So far I have not noticed any performance issues with the head but just looking for more information.
I appreciate your help with this.
Bill Harms
Proud owner of a 1929 Model A Ford.
Walworth, NY
Aluminum cylinder head for Model A
- Pat Weeden
- Site Admin
- Posts: 152
- Joined: Thu Feb 16, 2017 12:04 pm
- Location: Oregon, Wis.
- Contact:
Aluminum cylinder head for Model A
Here's a message received at BPA headquarters. Any leads would be helpful.
Pat Weeden, Site Admin
Brodhead Pietenpol Association
Brodhead Pietenpol Association
Re: Aluminum cylinder head for Model A
Wow, would have to consult the Old Testament!
Generally, they increase HP, about 10, at the expense of some reliability. Mostly popular on piets for weight savings. Some had bosses for drilling for a second set of plugs.
They come from the model A performance community, not really a Piet community innovation, although probably not a stretch to say the mid 80s to mid 90s Piet community is responsible for quite a resurgence in popularity.
I researched them pretty heavily in the mid 90s.
Tools
Generally, they increase HP, about 10, at the expense of some reliability. Mostly popular on piets for weight savings. Some had bosses for drilling for a second set of plugs.
They come from the model A performance community, not really a Piet community innovation, although probably not a stretch to say the mid 80s to mid 90s Piet community is responsible for quite a resurgence in popularity.
I researched them pretty heavily in the mid 90s.
Tools