Original Posted By: Paris Wilcox
I have a scan of it on my website:http://207.140.1.221/w3builder/piet/aci ... jpgRichard D.http://207.140.1.221/w3builder/piet/On 18 May 98 at 9:01, Dean Dayton wrote:> I saw just a picture and a few lines in Kitplanes or Sport Aviation> a couple of months ago. It was in the section where they devote a> few pages to showing peoples airplanes.> > I'll try to find it tonight.> > > > >Date: Fri, 15 May 1998 11:06:14 -0700 (PDT)> >From: Paris Wilcox > >Subject: Poplar Piet> >To: Pietenpol Discussion > >Reply-to: Pietenpol Discussion > >> >If Anyone knows where I can find "The Poplar Piet" I would love to> >know. I've been told about the article,but have not been able to find> >it. Already searched EAA's online article finder, but only have two> >mo's of sport aviation here to look through. No luck so far! Thanks,> >Paris W.> >> >> >> >> >> >> >> > > Dean Dayton - deandayton(at)hotmail.com> > Web Developer, http://www.autoeurope.comHomepage: http://207.140.1.221/W3builder"If PBS doesn't do it, I will!"________________________________________________________________________________
> > Poplar Piet
Pietenpol-List:
Original Posted By: Greg Cardinal
Many thanks for all the info on the "poplar Piet" I intend to give thebuilder a call tonight...will be happy to share info with anyinterested persons....now if somebody could just answer my suppyquestion-how much glue(T-88) Nails(is 1/4" a/c brass,concrete coated)and what kind(specifically)of plywood do I need to get atarted an myrib gusssetts? I'd really love to know- I'd like to be able to getstarted the day the plans get here as time is the limiting factor forme.(i wish i had started a year ago- too bad we can't all find ourtrue dreams of a lifetime earlier!)Many thanks again for all the help- the support here on the net- thislist,BPA page, R Decosta's page, G mclaren's-is INVALUABLE!________________________________________________________________________________
Many thanks for all the info on the "poplar Piet" I intend to give thebuilder a call tonight...will be happy to share info with anyinterested persons....now if somebody could just answer my suppyquestion-how much glue(T-88) Nails(is 1/4" a/c brass,concrete coated)and what kind(specifically)of plywood do I need to get atarted an myrib gusssetts? I'd really love to know- I'd like to be able to getstarted the day the plans get here as time is the limiting factor forme.(i wish i had started a year ago- too bad we can't all find ourtrue dreams of a lifetime earlier!)Many thanks again for all the help- the support here on the net- thislist,BPA page, R Decosta's page, G mclaren's-is INVALUABLE!________________________________________________________________________________
Pietenpol-List:
Original Posted By: "David B. Schober"
Hey Paris,I replied earlier but the message never got posted.....Plywood- 1/16" Don't forget to sand lightly prior to gluing to eliminatethe glazing. I used birch ply. Some people use mahogany.I used Aerolite glue for the rib construction. I found it much easier touse than T-88 for small pieces.3/8" nails were used. A pair of tweezers works very well to hold thenails. Half pound of nails will be plenty for the ribs.Boil the capstrips 20-30 minutes, NO LONGER, to soften them up.>>> Paris Wilcox 05/18/98 10:21am >>>Many thanks for all the info on the "poplar Piet" I intend to give thebuilder a call tonight...will be happy to share info with anyinterested persons....now if somebody could just answer my suppyquestion-how much glue(T-88) Nails(is 1/4" a/c brass,concrete coated)and what kind(specifically)of plywood do I need to get atarted an myrib gusssetts? I'd really love to know- I'd like to be able to getstarted the day the plans get here as time is the limiting factor forme.(i wish i had started a year ago- too bad we can't all find ourtrue dreams of a lifetime earlier!)Many thanks again for all the help- the support here on the net- thislist,BPA page, R Decosta's page, G mclaren's-is INVALUABLE!________________________________________________________________________________
Hey Paris,I replied earlier but the message never got posted.....Plywood- 1/16" Don't forget to sand lightly prior to gluing to eliminatethe glazing. I used birch ply. Some people use mahogany.I used Aerolite glue for the rib construction. I found it much easier touse than T-88 for small pieces.3/8" nails were used. A pair of tweezers works very well to hold thenails. Half pound of nails will be plenty for the ribs.Boil the capstrips 20-30 minutes, NO LONGER, to soften them up.>>> Paris Wilcox 05/18/98 10:21am >>>Many thanks for all the info on the "poplar Piet" I intend to give thebuilder a call tonight...will be happy to share info with anyinterested persons....now if somebody could just answer my suppyquestion-how much glue(T-88) Nails(is 1/4" a/c brass,concrete coated)and what kind(specifically)of plywood do I need to get atarted an myrib gusssetts? I'd really love to know- I'd like to be able to getstarted the day the plans get here as time is the limiting factor forme.(i wish i had started a year ago- too bad we can't all find ourtrue dreams of a lifetime earlier!)Many thanks again for all the help- the support here on the net- thislist,BPA page, R Decosta's page, G mclaren's-is INVALUABLE!________________________________________________________________________________