Original Posted By: LanhamOS(at)aol.com
Could you please repeat the source of these turnbuckles? Thanks!!---steve(at)byu.edu wrote:>> If you need turnbuckle you will be hard pressed to beat $6. I foundmine> for 5.95 several years ago. I would say buy! If I recall right Iused 36> on my piet.> > Steve E.> > -----Original Message-----> Peter P Frantz> Sent: Monday, November 02, 1998 9:12 AM> To: Pietenpol Discussion> Subject: turnbuckle source> > > Has anyone here checked Grant MacLaren's BPA web site notes lately? There's> a> fellow there who says he has found a source of new surplus AN 130> turnbuckles> for $6.00 a pop. Now, I haven't yet started to shop for hardware,but its> easy> to see that these are about half of what AS&S and Wicks are askingfor the> same> assembly. I know that others here have suggested places likeDillsburg,> Spencer, and B&B, but can I expect to find a price this low? Can Iget> lower> than $6.00 by scrounging?> > --Peter> > ==http://www.wrld.com/w3builder"All knowledge is of itself of some value. There is nothing so minute or inconsiderable, that I would not rather know it than not." --Samuel, Dr. Johnson________________________________________________________________________________