Original Posted By: Michael Brusilow
I think this topic has been covered before, but does someone have alist of spruce sources? Preferably one close to Maine. I have beenusing Wicks, but they are very slow, and shipping to Maine is high.RD==http://www.wrld.com/w3builder"All knowledge is of itself of some value. There is nothing so minute or inconsiderable, that I would not rather know it than not." --Samuel, Dr. Johnson________________________________________________________________________________
Pietenpol-List: spruce sources?
Pietenpol-List: Re: spruce sources?
Original Posted By:> Richard DeCosta
Pietenpol-List: Re: spruce sources?
Original Posted By:> > Richard DeCosta
You can tryb Condon Lumber in Stormville NY. Don't have a number handybut they advertise in boat building magazines. They also have an officein White Plains. Talk to Condon Bennet, he is a pilot (was one of mystudents) and knows what you need in terms of quality.Michael Brusilow wrote:> ----------
You can tryb Condon Lumber in Stormville NY. Don't have a number handybut they advertise in boat building magazines. They also have an officein White Plains. Talk to Condon Bennet, he is a pilot (was one of mystudents) and knows what you need in terms of quality.Michael Brusilow wrote:> ----------
> spruce sources?
Original Posted By: steve(at)byu.edu
> > I think this topic has been covered before, but does someone have a> list of spruce sources? Preferably one close to Maine. I have been> using Wicks, but they are very slow, and shipping to Maine is high.> > RD> > > > > ==> http://www.wrld.com/w3builder> "All knowledge is of itself of some value. There > is nothing so minute or inconsiderable, that I would > not rather know it than not." --Samuel, Dr. Johnson> > > > >Richard, this an old post from Grant's web site.It may help.Mike B ( Piet N 687 MB )________________________________________________________________________________
> > I think this topic has been covered before, but does someone have a> list of spruce sources? Preferably one close to Maine. I have been> using Wicks, but they are very slow, and shipping to Maine is high.> > RD> > > > > ==> http://www.wrld.com/w3builder> "All knowledge is of itself of some value. There > is nothing so minute or inconsiderable, that I would > not rather know it than not." --Samuel, Dr. Johnson> > > > >Richard, this an old post from Grant's web site.It may help.Mike B ( Piet N 687 MB )________________________________________________________________________________
> > spruce sources?
Original Posted By: Ian Holland
> >> > I think this topic has been covered before, but does someone have a> > list of spruce sources? Preferably one close to Maine. I have been> > using Wicks, but they are very slow, and shipping to Maine is high.> >> > RD> >> >> >> >> > ==> > http://www.wrld.com/w3builder> > "All knowledge is of itself of some value. There> > is nothing so minute or inconsiderable, that I would> > not rather know it than not." --Samuel, Dr. Johnson> >> >> >> > >> (2/10/98) (note address correction) Subj: Sitka> Spruce -- Dear Grant; I have a fairly large> quantity of Sitka spruce available. This is high> quality wood and meets the mil spec. If you or> anyone you know needs more information,> please feel free to E-mail me at> murray_johnson(at)bc.sympatico.ca and I will get> right back. Thanks, Murray >>>> Richard, this an old post from Grant's web site.It may help.>> Mike B ( Piet N 687 MB )--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________
> >> > I think this topic has been covered before, but does someone have a> > list of spruce sources? Preferably one close to Maine. I have been> > using Wicks, but they are very slow, and shipping to Maine is high.> >> > RD> >> >> >> >> > ==> > http://www.wrld.com/w3builder> > "All knowledge is of itself of some value. There> > is nothing so minute or inconsiderable, that I would> > not rather know it than not." --Samuel, Dr. Johnson> >> >> >> > >> (2/10/98) (note address correction) Subj: Sitka> Spruce -- Dear Grant; I have a fairly large> quantity of Sitka spruce available. This is high> quality wood and meets the mil spec. If you or> anyone you know needs more information,> please feel free to E-mail me at> murray_johnson(at)bc.sympatico.ca and I will get> right back. Thanks, Murray >>>> Richard, this an old post from Grant's web site.It may help.>> Mike B ( Piet N 687 MB )--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________