Original Posted By: Ken Beanlands
To the List,Does anyone know if the "Eelco" aluminun exhaust headers for corvairs arestill available? Are they still in business? Big Jim recommended these in anArticle he wrote for BPAN issue #31.Domenic________________________________________________________________________________
Pietenpol-List: Exhaust Headers
Pietenpol-List: Re: FW: Foam streamlining struts
Original Posted By:> Ken Beanlands
Thanks for the advice. My struts are already scheduled for the powdercoating shop along with my LG legs and bungee struts, engine mount andseat frame. Also, the welded ends will be exposed allowing for inspectionof the most likeli area for cracks to develop.KenOn Wed, 12 May 1999, BELLISSIMO, DOMENIC wrote:> Be carefull about covering your round struts. I makes inspection difficult.> Make sure it is rust protected before the covering, if I'm not mistaken, I> believe Brian Kenny found some mild corrosion on his strut after removing> the covering. Brian can confirm this. He did not replace the streamline> covering.> > Domenic> ----------
Thanks for the advice. My struts are already scheduled for the powdercoating shop along with my LG legs and bungee struts, engine mount andseat frame. Also, the welded ends will be exposed allowing for inspectionof the most likeli area for cracks to develop.KenOn Wed, 12 May 1999, BELLISSIMO, DOMENIC wrote:> Be carefull about covering your round struts. I makes inspection difficult.> Make sure it is rust protected before the covering, if I'm not mistaken, I> believe Brian Kenny found some mild corrosion on his strut after removing> the covering. Brian can confirm this. He did not replace the streamline> covering.> > Domenic> ----------