Original Posted By: Greggotone(at)aol.com
Subject: Pietenpol-List: Re: Pietenpol-List help with rib patternJust received GN-1 plans and am trying to figure out how the 4 sheets of wing rib patterns mate together. The patterns say "trim here" with an arrow pointing to a dotted outlined box, inside of which is a dotted lined "X". Just where does one trim?-vertically on the centers of the "X"? Vertically connecting the points of the arrow? Where??? The instuctions seem pretty vague to me for something as critical (or as simple ) as lining up 4 sheets of plans. Am I missing something very simple in my attempt to start this project. Thanks.Richard Savignano Seekonk,MA________________________________________________________________________________
Pietenpol-List: Re: Pietenpol-List help with rib pattern
Re: Pietenpol-List: Re: Pietenpol-List help with rib pattern
Original Posted By: "Richard Navratil"
Subject: Re: Pietenpol-List: Re: Pietenpol-List help with rib patternRichard, No problem, just trim out the squares (The X'd out portion) then follow the instructions for alignment. I would suggest making a couple of copies of the pattern first and be sure to cut up the copies. Save the original for your wall of fame! Gregg________________________________________________________________________________
Subject: Re: Pietenpol-List: Re: Pietenpol-List help with rib patternRichard, No problem, just trim out the squares (The X'd out portion) then follow the instructions for alignment. I would suggest making a couple of copies of the pattern first and be sure to cut up the copies. Save the original for your wall of fame! Gregg________________________________________________________________________________