Pietenpol-List: rib construction

matronics · Post by **matronics** » Sun Dec 31, 2006 2:45 pm

Original Posted By: "walt evans"

matronics · Post by **matronics** » Sun Dec 31, 2006 4:32 pm

Original Posted By: Ben Ramler

matronics · Post by **matronics** » Sun Dec 31, 2006 8:30 pm

Original Posted By: Tim Verthein
Ben,I'm still making ribs myself and spent today making sure that I at least finishedthe first half of them in 2006. I'm at the half-way mark now. I made rib#17 to be glued tomorrow so I can start the year on the right note. I saw yourpost and took some pictures while I was building and put them on my websiteif you're interested. I'm no pro but my EAA tech counselor said he'd "give mean A+" on my first interim review. Those are the only credentials I can provide[Laughing]--------Glenn ThomasN?????http://www.flyingwood.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 1 Jan 2007 04:16:08 -0800 (PST)

matronics · Post by **matronics** » Mon Jan 01, 2007 8:22 am

Original Posted By: "Glenn Thomas"
Glenn,Hats off to you for an outstanding site!GeneN502R----- Original Message -----

matronics · Post by **matronics** » Mon Jan 01, 2007 3:37 pm

Original Posted By: "Gene & Tammy"
Thanks guys. My site is a reflection of the ideas that flow on this forum. Weare truly lucky to have such a network of resources and encouraging friends inthis fine community. Happy New Year from warm and rainy CT!--------Glenn ThomasN?????http://www.flyingwood.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

matronics · Post by **matronics** » Wed Jan 03, 2007 6:45 pm

Original Posted By:> Ben Ramler
Hi BenI am trying to figure out what you are doing wrong.No notching required. Send pictures or send phone # .Or send me your address I have some spare rib sections.Dale Mpls> [Original Message]

matronics · Post by **matronics** » Wed Jan 03, 2007 7:33 pm

Original Posted By: "Oscar Zuniga"
Thanks Shad, I did not know that. I will keep an eye on it and may even add ahole.Thanks again,Don EmchRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

matronics · Post by **matronics** » Fri Apr 28, 2017 9:31 pm

Original Posted By: shad bell
> Subject: Pietenpol-List: rib construction>>> Hello Group,>> Hopefully everyone had great christmas! My question is on the ribcostruction. I've got my first rib almost done however my question is onthe gusset plate that sits on the sides of the rib in front. does 2 1/8" x3/4: sound right? then what about this 1/2x1/2" block that the plans talkabout does that somehow get nothced out and gets glued in? If anyone wantssee pictures I can post some.>>> Thanks,>> Ben Ramler> St. Cloud, MN>> __________________________________________________>>________________________________________________________________________________Date: Wed, 3 Jan 2007 17:07:28 -0800 (PST)

matronics · Post by **matronics** » Fri Apr 28, 2017 9:31 pm

Original Posted By: Isablcorky(at)aol.com
> Subject: Pietenpol-List: rib construction>>> Hello Group,>> Hopefully everyone had great christmas! My question is on the ribcostruction. I've got my first rib almost done however my question is onthe gusset plate that sits on the sides of the rib in front. does 2 1/8" x3/4: sound right? then what about this 1/2x1/2" block that the plans talkabout does that somehow get nothced out and gets glued in? If anyone wantssee pictures I can post some.>>> Thanks,>> Ben Ramler> St. Cloud, MN>> __________________________________________________>>__________________________________________________________________________________________________________________________________

Brodhead Pietenpol Association