Original Posted By: Michael Perez
There are of course 8 wires--a left and right thread on each end--that is 16 threads. I got 12 threads free, 3 still frozen, and broke one off.- I was very gentle, but it broke. One of the wires is also pitted. I was going to try to "save" these, but when one broke, I gave up. But sure, I might consider giving these up if you want to mess with them.=0AOn Mon, Aug 1, 2011 at 12:48 PM, Michael Perez wrote:=0AJohn, if there is a way for you to remove the flying wires intact, (say without cutting them off), I would be interested in having them. Assuming you plan on throwing them away, we can work out a deal.=0AMichael Perez=0AKaretaker Aero=0Awww.karetakeraero.com=0A" target="_blank">http://www.matronics.com/Navigator?Piet ... ribution-- John Kuhfahl, Lt Col USAF (Ret), President, KUHLCOUPER LLC=0A=0A________________________________________________________________________________Date: Tue, 2 Aug 2011 08:08:01 -0700 (PDT)
Pietenpol-List: Where to find good, cheap turnbuckles
Pietenpol-List: Where to find good, cheap turnbuckles
Original Posted By: John Kuhfahl
Subject: Pietenpol-List: Where to find good, cheap turnbuckles
Subject: Pietenpol-List: Where to find good, cheap turnbuckles
Pietenpol-List: Where to find good, cheap turnbuckles
Original Posted By: Michael Perez
Re: Pietenpol-List: Where to find good, cheap turnbuckles
Original Posted By: John Kuhfahl
FWIW I had to move my wing back 4" and had to make 2 new ones and shorten the other2.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009wing, tailfeathers done, fuselage rollingusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 1 Aug 2011 13:01:42 -0500Subject: Re: Pietenpol-List: Where to find good, cheap turnbuckles
FWIW I had to move my wing back 4" and had to make 2 new ones and shorten the other2.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009wing, tailfeathers done, fuselage rollingusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 1 Aug 2011 13:01:42 -0500Subject: Re: Pietenpol-List: Where to find good, cheap turnbuckles