Original Posted By: Mark Roberts
Checked out the videos on Facebook! You have built a fine looking airplane. Youraviator skills appear to match your craftsmanship. Just got in from gluing upa few parts. Figure I will be where you are in 5 years or so, thanks for helpingus aspiring Piet pilots keep our eye on the prize!Kyle--------Airspeed, altitude or brains: Two are always needed to successfully complete theflight.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: How it's made: Airplanes
Pietenpol-List: How it's made: Airplanes
Original Posted By: "Donald Lane"
Funny... I didn't see ONE piece of spruce in the whole thing... NOT ONE!And they call it an airplane??!http://www.youtube.com/watch?v=4LhN_T5t ... __________
Funny... I didn't see ONE piece of spruce in the whole thing... NOT ONE!And they call it an airplane??!http://www.youtube.com/watch?v=4LhN_T5t ... __________
Pietenpol-List: Re: How it's made: Airplanes
Original Posted By: "K5YAC"
For Oxy/Acetylene... I'm using RG-65 (N0. 32CMS). It is recommended for 4130 andis much cheaper that what you have found. https://www.aircraftspruce.com/catalog/ ... ------Mark ChouinardWings, Center Section and Empannage and Fuse framed up - Working on Landing GearRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: How it's made: Airplanes
For Oxy/Acetylene... I'm using RG-65 (N0. 32CMS). It is recommended for 4130 andis much cheaper that what you have found. https://www.aircraftspruce.com/catalog/ ... ------Mark ChouinardWings, Center Section and Empannage and Fuse framed up - Working on Landing GearRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: How it's made: Airplanes