Original Posted By: "giacummo"
This is the hinge setup for elevator and rudder on my Piet, light & strong.--------Adrian MWinnipeg, MBCanadaRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/dsc0 ... ___Subject: Pietenpol-List: stall characteristics
Pietenpol-List: stall characteristics
Original Posted By: Dan Yocum
Hello,Before anything, its nice to see Kevin back again with a lesson in hand. By themoment my wife don read this mails... thanks God, because if she do it, my projectfinished in the fireplace [Wink] July was a hard month, and even august.. I did't work on the airplane, but I reada lot abot a lot of things.. one of them was stall, how, when,devices, etc,etc.What are the Pietenpol stall characteristics?.. do you use any warning device?..what kind of them?...If you can ilustrate me a little about this .. Thnak you.--------Mario Giacummohttp://vgmk1.blogspot.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Tue, 07 Aug 2012 14:45:54 -0500
Hello,Before anything, its nice to see Kevin back again with a lesson in hand. By themoment my wife don read this mails... thanks God, because if she do it, my projectfinished in the fireplace [Wink] July was a hard month, and even august.. I did't work on the airplane, but I reada lot abot a lot of things.. one of them was stall, how, when,devices, etc,etc.What are the Pietenpol stall characteristics?.. do you use any warning device?..what kind of them?...If you can ilustrate me a little about this .. Thnak you.--------Mario Giacummohttp://vgmk1.blogspot.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Tue, 07 Aug 2012 14:45:54 -0500
Re: Pietenpol-List: stall characteristics
Original Posted By: Michael Perez
Re: Pietenpol-List: stall characteristics
Original Posted By: "giacummo"
NX18235 stalls very gently. It just gives a gentle buffet and the nose mushes down. The Johnson airspeed indicator is bouncing around at some ridiculously low number during this.This is with the original Pietenpol airfoil.No stall warning system is installed other than "the seat of my pants."Greg Cardinal----- Original Message -----
NX18235 stalls very gently. It just gives a gentle buffet and the nose mushes down. The Johnson airspeed indicator is bouncing around at some ridiculously low number during this.This is with the original Pietenpol airfoil.No stall warning system is installed other than "the seat of my pants."Greg Cardinal----- Original Message -----
Pietenpol-List: stall characteristics
Original Posted By: Michael Perez
Pietenpol-List: Re: stall characteristics
Original Posted By: "giacummo"
Oh, I thought they would work harden and get stiffer. But what do I know???--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: stall characteristics
Oh, I thought they would work harden and get stiffer. But what do I know???--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: stall characteristics
Original Posted By: "Douwe Blumberg"
resuming, no stall warning, the feelings are enough. isn't it?thank you.--------Mario Giacummohttp://vgmk1.blogspot.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
resuming, no stall warning, the feelings are enough. isn't it?thank you.--------Mario Giacummohttp://vgmk1.blogspot.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________