Original Posted By: shad bell
Pietenpol-List: AM-4 Overhaul
Pietenpol-List: Re: AM-4 Overhaul
Original Posted By: "taildrags"
Semih: yes, you have described the Bendix "lunchbox" mag. If you go on eBay andlook for item #131920162785, that is typical of them.--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 power, 72x36 Culver propRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: AM-4 Overhaul
Semih: yes, you have described the Bendix "lunchbox" mag. If you go on eBay andlook for item #131920162785, that is typical of them.--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 power, 72x36 Culver propRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: AM-4 Overhaul
Original Posted By: Ray Krause
Good move, starting this as its own thread. Here's what my A&P said about theAM-4 mags, which agrees with what speedbrake just posted: "Some shops will stillwork on Eisemann mags, but I don't know which ones. Parts are available throughFresno Air Parts, and some parts are available through Aircraft Spruce.For the most part, they are a pretty simple mag that any competent A&P can repair.The exception is that it needs to go to a magneto shop to have the magnetsre-magnetized if they are getting weak."--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 power, 72x36 Culver propRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Good move, starting this as its own thread. Here's what my A&P said about theAM-4 mags, which agrees with what speedbrake just posted: "Some shops will stillwork on Eisemann mags, but I don't know which ones. Parts are available throughFresno Air Parts, and some parts are available through Aircraft Spruce.For the most part, they are a pretty simple mag that any competent A&P can repair.The exception is that it needs to go to a magneto shop to have the magnetsre-magnetized if they are getting weak."--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 power, 72x36 Culver propRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re: Pietenpol-List: Re: AM-4 Overhaul
Original Posted By: Michael Perez