N34KP's engine

Discussion area for builders of Pietenpol aircraft, both beginners and experienced folks. Share ideas, ask questions and help build the Pietenpol community.
Post Reply
User avatar
Richard Roller
Posts: 181
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

N34KP's engine

Post by Richard Roller »

The engine for 34KP is going back together. Clearances on the crank bearings checked today. The crank is now installed and the caps torqued.
IMG_20220605_170822.jpg
User avatar
Richard Roller
Posts: 181
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: N34KP's engine

Post by Richard Roller »

IMG_20220606_155612.jpg
IMG_20220607_165153.jpg
Pistons in, head on and initial round of torques completed.
User avatar
taildrags
Posts: 512
Joined: Tue Mar 07, 2017 10:39 pm

Re: N34KP's engine

Post by taildrags »

Nice and clean. Very pretty engine.

-Oscar
User avatar
Richard Roller
Posts: 181
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: N34KP's engine

Post by Richard Roller »

IMG_20220617_154911.jpg
User avatar
Richard Roller
Posts: 181
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: N34KP's engine

Post by Richard Roller »

IMG_20220623_144017.jpg
Back on the mount.
User avatar
taildrags
Posts: 512
Joined: Tue Mar 07, 2017 10:39 pm

Re: N34KP's engine

Post by taildrags »

A marriage made in Air Camper heaven! Nice work, Richard.

-Oscar
User avatar
Richard Roller
Posts: 181
Joined: Mon May 22, 2017 11:14 am
Location: Olathe, Ks.

Re: N34KP's engine

Post by Richard Roller »

IMG20220629170625.jpg
IMG_20220626_154429.jpg
Post Reply