Original Posted By: "David B. Schober"
Does anyone out there know the dimensions for tapered crankshafts? I believe they are sized to different propellor hubs as SAE standards but haven't been able to find the sizes locally.Thanks, John Mc________________________________________________________________________________
Pietenpol-List: crankshafts/prop hubs
Pietenpol-List: Re: crankshafts/prop hubs
Original Posted By: steve(at)byu.edu
The engine Type Certificate Data Sheet has that info. Continental A65 and C85have SAE 0 taper. I'm not sure where to get the specs for the SAE 0 taper. It'snot in the Machinery Handbook. Try going to the SAE web sight and e-mailingsomeone there.McNarry, John wrote:> Does anyone out there know the dimensions for tapered crankshafts? I believe> they are sized to different propellor hubs as SAE standards but haven't been> able to find the sizes locally.>> Thanks, John Mc--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________
The engine Type Certificate Data Sheet has that info. Continental A65 and C85have SAE 0 taper. I'm not sure where to get the specs for the SAE 0 taper. It'snot in the Machinery Handbook. Try going to the SAE web sight and e-mailingsomeone there.McNarry, John wrote:> Does anyone out there know the dimensions for tapered crankshafts? I believe> they are sized to different propellor hubs as SAE standards but haven't been> able to find the sizes locally.>> Thanks, John Mc--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________