Pietenpol-List: AN Hardware

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: John Hofmann
Subject: Pietenpol-List: AN Hardware
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Post by matronics »

Original Posted By: Steve Ruse
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Pietenpol-List: Grade 8 Prop bolts forced landing--wrecked Air

Post by matronics »

Original Posted By: Steve Ruse
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: "Egan, John"
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: "walt evans"
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: John Hofmann
Subject: Re: Pietenpol-List: AN Hardware
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

> Re: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: mark thomson
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

RE: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: owner-pietenpol-list-server(at)matronics.com [mailto:owner-pietenpol-list-server(at)matronics.com] On Behalf Of Egan, John
You only had to go to school for one day!No wonder you remember everything aboutthat day!Just pullin your wire ,haha!There is a reason why we are supposed touse AN hardware.Why temp the Gods.Do as your told .For the little extra it costs,itmay save your life.Don't be a Titanic!-----Original Message-----
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Re: Pietenpol-List: AN Hardware

Post by matronics »

Original Posted By: Michael D Cuy
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: Handy info re: AN Hardware

Post by matronics »

Original Posted By: "Bill Church"
For those in or around Southern Ontario (that's Ontario, Canada, not Ontario California),there will be a Pietenpol event happening this Saturday (June 18, 2011).For 20 consecutive years, the Brussels Pietenpol Picnic was graciously hosted bythe Armstrong family, at their grass strip, in rural Brussels, Ontario. 2009was the last one, and last year, 2010, for the first time in over 20 years, therewas no Pietenpol Picnic. But this year, the tradition continues, at a newlocation.The first annual Waterdown Pietenpol Picnic will be hosted by Brian Kenney andhis wife Hope, at their farm, just a little north of Hamilton. Following is thepertinent information:The relocated Pietenpol Picnic will be held next Saturday June 18 at the Kenney'sfarm at 374 Concession 7E in Flamborough(Hamilton). It will run from 10:00a.m. to dusk. There will be food available for lunch. Camping is available forfriday and saturday night and there is plenty of floor space in the house forthose who would like to bring an air mattress and sleeping bags. Please bringlawn chairs if you can. There is a 3000 foot grass strip available that is 14/32 and is protected by treesto the west. Aircraft parking will be on the north end of the strip and onthe west side of the strip on the south end. Both downwinds are on the east sideof the runway. Suggested arrival procedure is to fly 140 degrees from theCarlise water tower following Center road. Past the golf course, between the 7and 6 concessions turn left 90 degrees (east) and over fly the field. The windsock is opposite the yellow roof buidling. Turn left or right to join the middownwind. From center road the strip can to hard to see because of the trees.Suggest touchdowns be on the wide south end of the of the strip. To get there by road turn east bound on the 7E Concession from highway 6. Thisis between Millgrove and Freelton (just south of Ken Gamble's place). Drive tocenter road and continue to the railway tracks. Our driveway is the second oneon the south side (right) past the railroad tracks. Brian and Hope KenneyRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Handy info re: AN Hardware
Locked