Original Posted By: "Douwe Blumberg"
Hey Corky,I'll get you started!I'll buy a set from you. Don't need them now, but I'd like to donate themor keep 'em around to help someone out one day.Tell me what you want to charge, and let's get going.Douwedouweblumberg(at)earthlink.net805 573 3564________________________________________________________________________________
Pietenpol-List: Corky's rib building company
Pietenpol-List: Re: Progress!
Original Posted By: "echobravo4"
Subject: Re: Pietenpol-List: Corky's rib building companyIn a message dated 4/7/2013 7:32:50 A.M. Central Daylight Time, douweblumberg(at)earthlink.net writes:Hey Corky, I=99ll get you started! I=99ll buy a set from you. Don=99t need them now, but I=99d like to donate them or keep =98em around to help someone out one day. Tell me what you want to charge, and let=99s get going. Douwe _douweblumberg(at)earthlink.net_ (mailto:douweblumberg(at)earthlink.net) 805 573 3564I was hoping to get a few encouraging responses but it is over the top. Even naming my business. Smells like Washington, D C. Hope they don't send the tax collector before I drive the first nail.________________________________________________________________________________Subject: Pietenpol-List: Re: Progress!
Subject: Re: Pietenpol-List: Corky's rib building companyIn a message dated 4/7/2013 7:32:50 A.M. Central Daylight Time, douweblumberg(at)earthlink.net writes:Hey Corky, I=99ll get you started! I=99ll buy a set from you. Don=99t need them now, but I=99d like to donate them or keep =98em around to help someone out one day. Tell me what you want to charge, and let=99s get going. Douwe _douweblumberg(at)earthlink.net_ (mailto:douweblumberg(at)earthlink.net) 805 573 3564I was hoping to get a few encouraging responses but it is over the top. Even naming my business. Smells like Washington, D C. Hope they don't send the tax collector before I drive the first nail.________________________________________________________________________________Subject: Pietenpol-List: Re: Progress!
Original Posted By: "Ralph"
That's very nice work Mark-On the wood and the metal--------Earl BrownI may not have gone where I intended to go, but I think I have ended up where Iintended to be.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
That's very nice work Mark-On the wood and the metal--------Earl BrownI may not have gone where I intended to go, but I think I have ended up where Iintended to be.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: Re: Corky's rib building company
Original Posted By: "kmercer"
That is Iplan to purchase a new AXEL and related tubing. [Laughing]Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Corky's rib building company
That is Iplan to purchase a new AXEL and related tubing. [Laughing]Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Corky's rib building company
Original Posted By: Ray Krause
Corky,If you're looking for more business, I'm in for a set of ribs (after Douwe's, ofcourse!)!Ken MercerSan Rafael, CA (but a native Texan)--------Ken MercerSan Rafael, CA (KDVO)Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Corky,If you're looking for more business, I'm in for a set of ribs (after Douwe's, ofcourse!)!Ken MercerSan Rafael, CA (but a native Texan)--------Ken MercerSan Rafael, CA (KDVO)Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: Re: Aluminum Bump
Original Posted By: "Mark Roberts"
If it's pregnant, I want its first offspring!Ray KrauseSent from my iPadOn Apr 7, 2013, at 4:10 PM, Jim Boyer wrote:> Maybe like Kim K. its pregnant and that is its baby bump?> > > ________________________________________________________________________________Subject: Pietenpol-List: Re: Aluminum Bump
If it's pregnant, I want its first offspring!Ray KrauseSent from my iPadOn Apr 7, 2013, at 4:10 PM, Jim Boyer wrote:> Maybe like Kim K. its pregnant and that is its baby bump?> > > ________________________________________________________________________________Subject: Pietenpol-List: Re: Aluminum Bump
Original Posted By: "Clif Dawson"
That's cool Gary! You gotta tell me how it's done, or is this in one of Uncle Tony'sbooks too! I've got the whole set, but haven't cracked the engine ones yet...Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
That's cool Gary! You gotta tell me how it's done, or is this in one of Uncle Tony'sbooks too! I've got the whole set, but haven't cracked the engine ones yet...Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re: Pietenpol-List: Aluminum Bump
Original Posted By: helspersew(at)aol.com
Subject: Re: Pietenpol-List: Re: Corky's rib building companyIn a message dated 4/8/2013 3:01:11 A.M. Central Daylight Time, mercer.k(at)comcast.net writes:--> Pietenpol-List message posted by: "kmercer" Corky,If you're looking for more business, I'm in for a set of ribs (after Douwe's, of course!)!Ken MercerSan Rafael, CA (but a native Texan)--------Ken MercerSan Rafael, CA (KDVO)Read this topic online here:http://forums.matronics.com/viewtopic.p ... 398112This was a Sat night inspiration. It's now Monday morn and I haven't talked with my material source. Will put you down as a potential. Will let you know cost ASAP.CorkyWhat worries me the most is FREIGHT. They have gone krazy.________________________________________________________________________________Subject: Re: Pietenpol-List: Aluminum Bump
Subject: Re: Pietenpol-List: Re: Corky's rib building companyIn a message dated 4/8/2013 3:01:11 A.M. Central Daylight Time, mercer.k(at)comcast.net writes:--> Pietenpol-List message posted by: "kmercer" Corky,If you're looking for more business, I'm in for a set of ribs (after Douwe's, of course!)!Ken MercerSan Rafael, CA (but a native Texan)--------Ken MercerSan Rafael, CA (KDVO)Read this topic online here:http://forums.matronics.com/viewtopic.p ... 398112This was a Sat night inspiration. It's now Monday morn and I haven't talked with my material source. Will put you down as a potential. Will let you know cost ASAP.CorkyWhat worries me the most is FREIGHT. They have gone krazy.________________________________________________________________________________Subject: Re: Pietenpol-List: Aluminum Bump
Original Posted By: Gary Boothe
Dear Mr. Boothe,It is a very good thing that you were able to rectify this rather serious discrepancy now, rather than later. And it is even more commendable (and admirable) that you are of such elevated character, to be able to admit to such a tragic mistake publicly. As we all know on this list, we are fast approaching the (limited) annual May 1st revealing and opening of the "lost" Bernard H (don't call me Bernie) Pietenpol files, that I have the highly-honored position to have in my possession, the fiduciary duty been bestowed upon me and entrusted with. I can assure you that on that date, I will surely look into and clarify this matter, just as soon as we can open the hermetically sealed jar that these fragile papers are stored. Last year, according to my recollection, I thought there was a BHP directive that went "No materials or processes not currently known shall be used in he production of any BHP design airplane" or something to that effect.Respectfully,Dan HelsperPuryear, TN-----Original Message-----
Dear Mr. Boothe,It is a very good thing that you were able to rectify this rather serious discrepancy now, rather than later. And it is even more commendable (and admirable) that you are of such elevated character, to be able to admit to such a tragic mistake publicly. As we all know on this list, we are fast approaching the (limited) annual May 1st revealing and opening of the "lost" Bernard H (don't call me Bernie) Pietenpol files, that I have the highly-honored position to have in my possession, the fiduciary duty been bestowed upon me and entrusted with. I can assure you that on that date, I will surely look into and clarify this matter, just as soon as we can open the hermetically sealed jar that these fragile papers are stored. Last year, according to my recollection, I thought there was a BHP directive that went "No materials or processes not currently known shall be used in he production of any BHP design airplane" or something to that effect.Respectfully,Dan HelsperPuryear, TN-----Original Message-----
Pietenpol-List: Aluminum Bump
Original Posted By: "TOM STINEMETZE"
Pietenpol-List: Re: Corky's rib building company
Original Posted By: "taildrags"
Subject: Re: Pietenpol-List: Re: An InquiryIn a message dated 4/8/2013 7:25:12 P.M. Central Daylight Time, jarheadpilot82(at)hotmail.com writes:--> Pietenpol-List message posted by: "jarheadpilot82" Corky,I kinda' like the name "Corky's Rib Shack" for the title of your business.Just a thought.--------Semper Fi,Terry HandAthens, GARead this topic online here:http://forums.matronics.com/viewtopic.p ... 9#398179In all my years I've probably been called everything so these new business names are welcome.No I'm no Semper Fi but I do go back to OCS, Ft Benning 1943Keep those names coming, Also, if any might have an idea on the best way to box a set of ribs for shipment lets have it.Corky________________________________________________________________________________Subject: Pietenpol-List: Re: Corky's rib building company
Subject: Re: Pietenpol-List: Re: An InquiryIn a message dated 4/8/2013 7:25:12 P.M. Central Daylight Time, jarheadpilot82(at)hotmail.com writes:--> Pietenpol-List message posted by: "jarheadpilot82" Corky,I kinda' like the name "Corky's Rib Shack" for the title of your business.Just a thought.--------Semper Fi,Terry HandAthens, GARead this topic online here:http://forums.matronics.com/viewtopic.p ... 9#398179In all my years I've probably been called everything so these new business names are welcome.No I'm no Semper Fi but I do go back to OCS, Ft Benning 1943Keep those names coming, Also, if any might have an idea on the best way to box a set of ribs for shipment lets have it.Corky________________________________________________________________________________Subject: Pietenpol-List: Re: Corky's rib building company